Asymmetric Buckling of the Annular Plate with an Internal Source of Heat
Corressponding author's email:
hungpht@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.72A.2022.1138Keywords:
Axisymmetric Buckling, Internal heat source, Shooting method, Annular plate, Modified Karman’s EquationsAbstract
In this article, the axisymmetric stability of an elastic annular plate with distributed internal heat source under uniform constant compressive radial loading at the outer edge is investigated. The governing and compatibility equations of the annular plate are taken from modified Karman’s equations, which are solved by the shooting method. The effect of the density of distributed internal heat source on critical load is investigated and discussed in detail. The numerical results of the plate without an internal heat source are in good agreement with the results from the literature, validating the effectiveness and advantages of the current method. The critical buckling load increases with a rise of the density of distributed internal heat sources. Moreover, an increase of wave number increases the critical buckling loads of the plate. The results of this research can be considered as benchmark solutions for buckling of the annular plates with an internal heat source.
Downloads: 0
References
G. H. Bryan, "On the Stability of a Plane Plate under Thrusts in its own Plane, with Applications to the “Buckling” of the Sides of a Ship," Proceedings of the London Mathematical Society, pp.54-67, 1890.
W. R. Dean, "The elastic stability of an annular plate," Proceedings of the Royal Society of London Series A, Containing Papers of a Mathematical and Physical Character, pp.268-284, 1924.
N. Yamaki, "Buckling of a thin annular plate under uniform compression," Journal of Applied Mechanics, vol.25, pp.267-273, 1958.
S. Majumdar, "Buckling of a thin annular plate under uniform compression," AIAA Journal, vol.9, pp.1701-1707, 1971.
P. Ciancio and J. Reyes, "Buckling of circular, annular plates of continuously variable thickness used as internal bulkheads in submersibles," Ocean engineering, vol.30, pp.1323-1333, 2003.
C. Y. Wang, "On the buckling of a circular plate on an elastic foundation," Transactions-american society of mechanical engineers journal of applied mechanics, pp.772:795, 2005.
H. Khosravi and M. Khosravi, "An exact solution of thermal stability analysis of bimorph functionally graded annular plates," Revista de la Construcción Journal of Construction, "vol.16, pp.66-81, 2017.
D. Pawlus, "Temperature Effect on Stability of Clamped–Clamped Composite Annular Plate with Damages," Materials, vol.14, 4559, 2021.
G. Zhang, C. Xiao, A. Rahimi, and M. Safarpour, "Thermal and mechanical buckling and vibration analysis of FG-GPLRC annular plate using higher order shear deformation theory and generalized differential quadrature method," International Journal of Applied Mechanics, vol. 12, 2050019, 2020.
L. Zubov, "Von Kármán equations for an elastic plate with dislocations and disclinations," Doklady Physics, Springer, pp. 67-70, 2007.
Зубов ЛМ and Хунг ФТ., "Сильный изгиб круглой пластинки с непрерывно распределенными дисклинациями," Известия высших учебных заведений Северо-Кавказский регион Естественные науки, pp.28-33, 2010.
АС. Вольмир, Устойчивость деформируемых систем в 2 ч Часть 1, 2018.
Downloads
Published
How to Cite
License
Copyright (c) 2022 Journal of Technical Education Science
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
