Dynamic stability improvement of a large-scale machine power system with a DFIG-based wind farm using a generalized unified power-flow controller (GUPFC)
Corressponding author's email:
misa@hcmute.edu.vnKeywords:
Wind power, a large-scale power system, doubly fed induction generator (DFIG), generalized unified power-flow controller (GUPFC), stabilityAbstract
This research proposes the dynamic stability improvement of a large-scale power system which consists of a conventional synchronous generator (SG)-based power plant integrated with a doubly-fed induction generator (DFIG)-based wind farm by using a generalized unified power-flow controller (GUPFC). The complete dynamic mathematical equations of the studied system are established in dq-axis reference frame under three-phase balanced conditions. In addition to the power flow control function of the GUPFC, a proportional-integral-derivative (PID) type oscillation damping controller (ODC) is designed for the GUPFC to offer adequate damping for the studied system. The proposed ODC for the GUPFC is designed using the pole assignment method based on modal control theory. The steady-state analysis and time-domain simulation results show that the studied system without GUPFC suffers from low-damped low-frequency oscillations due to the electromechanical mode of the SGs. The damping of these oscillations, however, is slightly increased when the GUPFC is implemented in the transmission line for controlling the power flow. The results obtained also show that the designed ODC for the GUPFC can significantly increase the damping and, hence, effectively improve the dynamic stability of the studied system under various disturbance conditions.
Downloads: 0
References
R. Pena, J. C. Clare, and G. M. Asher, “Doubly fed induction generator using back-to-back PWM converters and its application to variable speed wind-energy generation,” Proc. Inst. Elect. Eng., Elect. Power Appl., vol. 143, no. 3, pp. 231–241, May 1996.
L. Wang and K.-H. Wang, “Dynamic stability analysis of a DFIG-based offshore wind farm connected to a power grid through an HVDC link,” IEEE Trans. Power Syst., vol. 26, no. 3, pp. 1501–1510, Aug. 2010.
L. Wang and L.-Y. Chen, “Reduction of power fluctuations of a largescale grid-connected offshore wind farm using a variable frequency transformer,” IEEE Trans. Sustain. Energy, vol. 2, no. 3, pp. 226–234, Apr. 2011.
E. Muljadi, T. B. Nguyen, and M. A. Pai, “Impact of wind power plants on voltage and transient stability of power systems,” in Proc. IEEE Energy 2030 Conf., Nov. 2008, pp. 1–7.
O. Anaya-Lara, A. Arulampalam, G. Bathurst, F. M. Hughes, and N. Jenkins, “Transient analysis of DFIG wind turbines in multi-machine networks,” in Proc. 18th Int. Conf. Exhib. Electricity Distribution CIRED, Jun. 2005, pp. 1–5.
P. Kundur, Power System Stability and Control, New York, USA: McGraw-Hill, 1994. [6]
R. S. Pena, “Vector control strategies for a doubly-fed induction generator driven by a wind turbine,” Ph.D. dissertation, Dept. Electrical Engineering, Univ. Nottingham, Nottingham, U.K., 1996.
I. Erlich, J. Kretschmann, J. Fortmann, S. Mueller-Englhardt, and H. Wrede, “Modeling of wind turbines based on doubly-fed induction generators for power system stability studies,” IEEE Trans. Power Systems, vol. 22, no. 3, pp. 909-919, Aug. 2007.
J. G. Slootweg, H. Polinder, and W. L. Kling, “Dynamic modeling of a wind turbine with doubly fed induction generator,” in Proc. 2001 IEEE Power Engineering Society Summer Meeting, Vancouver, British Columbia, Jul. 15-19, 2001, pp. 644-649.
J. B. Ekanayake, L. Holdsworth, and N. Jenkins, “Comparison of 5th order and 3rd order machine models for doubly fed induction generator (DFIG) wind turbines,” Electric Power Systems Research, vol. 67, no. 3, pp. 207-215, Dec. 2003.
J. Arbi, M. J.-B. Ghorbal, I. Slama-Belkhodja, and L. Charaabi, “Direct virtual torque control for doubly fed induction generator grid connection,” IEEE Trans. Industrial Electronics, vol. 56, no. 10, pp. 4163-4173, Oct. 2009.
G. Iwanski and W. Koczara, “DFIG-based power generation system with ups function for variable-speed applications,” IEEE Trans. Industrial Electronics, vol. 55, no. 8, pp. 3047-3054, Aug. 2008.
A. Luna, F. K. de Araujo Lima, D. Santos, P. Rodriguez, E. H. Watanabe, and S. Arnaltes, “Simplified modeling of a DFIG for transient studies in wind power applications,” IEEE Trans. Industrial Electronics, vol. 58, no. 1, pp. 9-20, Jan. 2011.
X. Xu, R. M. Mathur, J. Jiang, G. J. Rogers, and P. Kundur, “Modeling of generators and their controls in power system simulations using singular perturbations,” IEEE Trans. Power Systems, vol. 13, no. 1, pp. 109-114, Feb. 1998.
V. Azbe and R. Mihalic, “Damping of power-system oscillations with the application of a GUPFC,” in Proc. 2009 IEEE Bucharest Power Tech Conference, Bucharest, Romania, Jun. 28-Jul. 2, 2009, pp. 1-6.
R. S. Lubis, S. P. Hadi, and Tumiran, “Modeling of the generalized unified power flow controller for optimal power flow,” in Proc. 2011 International Conference on Electrical Engineering and Informatics, Bandung, Indonesia, Jul. 17-19, 2011, pp. 1-6.
X.-P. Zhang, E. Handschin, and M. Yao, “Model of the generalized unified power flow controller (GUPFC) in a nonlinear interior point OPF,” IEEE Trans. Power Systems, vol. 16, no. 3, pp. 367-372, Aug. 2001.
L. Wang and Z.-Y. Tsai, “Stabilization of generator oscillations using PID STATCON damping controllers and PID power system stabilizers,” in Proc. 1999 IEEE Power Engineering Society Winter Meeting, New York, NY, USA, Jan. 31- Feb. 4, 1999, vol. 2, pp. 616-621.
Downloads
Published
How to Cite
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
