Determination of thermal response factors of building wall in Viet Nam condition based on frequency domain regression Method
Corressponding author's email:
nhutlm@hcmute.edu.vnKeywords:
Thermal response factors, building wall, frequency domain regression method, transien heat conduction, thermal loadAbstract
The objective of this research is to determine the thermal response factors of building wall to use for thermal load calculation of building in Viet Nam condition. In this work, a MATLAB program was developed based on the frequency domain regression (FDR) method to estimate the polynomial s-transfer function of transient heat conduction of building wall. The values of thermal response factors were obtained by applying Laplace transforms on the polynomial s-transfer function. The calculated results showed that the fifth-order polynomial s-transfer functions of the outside heat conduction GX(s), across heat conduction GY(s) and inside heat conduction GZ(s) of building wall were found at the 55 first points of N=11×(7-2)+1 frequency points within the frequency range of 10-7 to 10-2 radian.s-1, and the error percentage between the thermal transmittance coefficient U and the sum of thermal response factors of the outside heat conduction, across heat conduction and inside heat conduction of the building wall were 7.44×10-9%, 5.83×10-9%, 5.86×10-9%, respectively.
Downloads: 0
References
R.V. Churchill, Operational mathematics, 2nded. New York: McGraw-Hill,.
W. N. Brisken and S.G. Reque, Heat load calculations by thermal response, ASHRAE Transaction,62, pp.391-424, 1956.
G. P. Mitalas, Calculations of transient heat flow through walls and roofs, ASHRAE Transaction, 74, pp.182-188, 1968.
G. P. Mitalas and D.G. Stephenson, Room thermal response factors, ASHRAE Transaction, 73(2), III.1.1-1.7, 1967.
G. P. Mitalas and D.G. Stephenson, Cooling load calculation by thermal response method, ASHRAE Transaction, 73(1), pp.125-134, 1967.
G. P. Mitalas and D.G. Stephenson, Calculations of heat conduction transfer functions for multi-layer slabs, ASHRAE Transaction, 77, pp.117-126, 1971.
D. C. Hittle and R. Bishop, An improved root-finding procedure for use in calculating transient heat flow through multilayered slab, Int.J. Heat and Mass Transfer, 26, pp.1685-1693, 1983.
K. Ouyang and F. Haghighat, A procedure for calculating thermal response factors of multi-layer walls-state space method, Building and Environment, 26, pp.173-177, 1991.
Y. M. Chen and Z. K. Chen, A neural – network based experimental technique for determining z-transfer function coefficients of a building envelope, Building and Environment, 35, pp.181-189, 2000.
Y. M. Chen and S. W. Wang, Frequency-domain regression method for estimating CTF models of building multilayer constructions, Applied Mathematical Modelling, 25, pp.579-592, 2001.
S. W. Wang and Y. M. Chen, A novel and simple building load calculation model for building and system dynamic, Applied Thermal Engineering, 21, pp.683-702, 2001.
S. W. Wang and Y. M. Chen, A simple procedure for calculating thermal response factors and conduction transfer functions of multilayer, Applied Thermal Engineering, 22, pp.333-338, 2002.
S. W. Wang and Y. M. Chen, Transient heat flow calculation for multilayer construction using a frequency domain regression, Building and Environment, 38, pp.45-61, 2003.
Y. M. Chen and S. W. Wang, A new procedure for calculating periodic response factors based on frequency domain regression method, In.l Journal of Thermal Sience, 44, pp.382-392, 2005.
J. Wang, S. Wang and et al, Short time step heat flow calculation of building constructions based on frequency domain regression method, Int. Journal of Thermal Sience, 48, pp.2355-2364, 2009.
Downloads
Published
How to Cite
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
