Phase stress determination and simulation for AZ composite having stress gradient in orthopedic applications

Authors

  • Chi Cuong Le Ho Chi Minh City University of Technology and Education, Vietnam
  • Thi Anh Tuyet Chau Ho Chi Minh City University of Technology and Education, Vietnam

Corressponding author's email:

cuonglc@hcmute.edu.vn

Keywords:

X-ray Elastic Constants (XEC), Alumina-Zirconia (AZ) composite, Stress Gradient

Abstract

The X-ray stress of dual-phase composite AZ is determined from X-ray elastic constants by using Reuss, Voigt and Eshelby–Kroner models. The simulated result showed that the compound XEC in the Reuss model is independent of the volume composition of inclusion Al2O3 and it is valid for low inclusion composition. The Voigt and Eshelby-Kroner models gave closed stress values to the experimental result, while they are constant for the Reuss model.

Downloads: 0

Download data is not yet available.

References

B.D.Cullity and S.R.Stock, Elements of X–ray Diffraction, Prentice Hall, pp.391-439.

K.Tanaka, S.Kodama and T.Goto, X–ray Diffraction Studies on The Deformation And Fracture of Solids, Elsevier Applied Science,1993,pp.1-28.

L.C.Cương, Simulation Of Sin2ψ Diagram in Stress Determination of Textured Materials, The 2012 International Conference on Green Technology and Sustainable Development, Vietnam, Sep. 2012, pp.201-204.

Lê Chí Cương, Development of Automated X–ray Stress Analyzer and its Applications in Stress Measurement of Textured Materials, PhD. Thesis, 2004.

V.Hauk, Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, 1997, pp. 254-298.

V. Hauk, H. Hougardy, E. Macherauch, Residual Stresses Measurement-Calculation- Evaluation, Informations Gesellschart, 2005, p.255.

Landolt–Bornstein, Numerical Data and Functional Relationship in Science and Technology, New Series, Gruppe III, Vol. 11, Springer Verlag, Berlin, Heidelberg, New York, p.142.

I.C.Noyan, J.B.Cohen, Residual Stress–Measurement by Diffraction and Interpretation, Springer–Verlag, 1987, pp.63-72.

Karel Van Acker, Internal Stress States in Cold Worked Metals and in Metal Matrix Composites, Katholieke Universiteit Leuven, 2008, pp.33-47.

Keisuke Tanaka, Shotaro Kodama and Toru Goto, X–ray Diffraction Studies on The Deformation And Fracture of Solids, Elsevier, Applied Science, pp. 1-27.

Downloads

Published

25-01-2016

How to Cite

[1]
C. C. Le and T. A. T. Chau, “Phase stress determination and simulation for AZ composite having stress gradient in orthopedic applications ”, JTE, vol. 11, no. Special Issue 01, pp. 25–32, Jan. 2016.

Issue

Vol. 11 No. Special Issue 01 (2016)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright © JTE.