Using CAD in design and manufacture of RC motor-glider with 1.8 m wing-span
Corressponding author's email:
tapchikhgkdt@hcmute.edu.vnKeywords:
CAD, design and manufacture of RC model airplaneAbstract
Nowadays, the market of RC model airplane in Vietnam is a new one, but it has a strong potential for development. In the aeronautical research field, the use of RC model airplane is primordial in order to verify and validate the reduced scale design problem. This paper aims for a better procedure of the design and the manufacture of RC model airplane where the experience of designers is not a major factor, and the use of the graphical software is dominant to facilitate the design.
Downloads: 0
References
Edi Sofyan, “Identification of Model Aircraft Dynamic Using Flight Testing”, Luận văn Thạc sĩ chuyên ngành Hàng không, Viện Kỹ thuật Hoàng gia Melbourne, Úc, 09/1996.
Estimation of moment of inertia: www.eng-tips.com/viewthread.cfm?qid=138370
Robert C. Nelson, “Flight Stability and Automatic Control”, 2nd ed., University of Notre Dame, 1998
Đề tài nghiên cứu khoa học cấp Trường năm 2011, “Thiết kế chế tạo mô hình máy bay lượn dùng động cơ điện có sãi cánh 1.8 m”, Mã số T-KTGT-2011-34, chủ nhiệm đề tài TS. Ngô Khánh Hiếu, Trường Đại học Bách khoa Tp. HCM.
Nguyễn Hữu Lộc, “Sử dụng AutoCAD 2008”, Nhà xuất bản Thành phố Hồ Chí Minh, 1018 trang, 2007.
“Balsa Wood Core Material”, Balsaflex, http://www.gurit.it/Files/Documents/English%20Datasheets%20SP-HM)/Balsaflex_v3.pdf
Aircraft Plywood: www.misterplywood.com.au/products/plywood/aircraft-plywood
HobbyKing: www.hobbyking.com
Alibaba: www.alibaba.com
Phạm Bá Sơn, “Initial Flight Test of the RC Model Aircraft using Electric Motor”, luận văn tốt nghiệp Kỹ sư Hàng không, chương trình Việt-Pháp (PFIEV), Đại học Bách khoa Tp. HCM, 07/2012.
Downloads
Published
How to Cite
Issue
Section
Categories
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
