Force analysis of the planetary Hypocycloid roller gears
Corressponding author's email:
gianglh@hcmute.edu.vnKeywords:
hypocycloid reducerAbstract
Hypocycloid reducer is usually used in devices with high precision such as the industrial robots, the CNC machines and the digital-control equipments, because of its advantages large transmission ratio, compact size, high precision because of backlash reduction. Calculation and design of this gear box are to determine the force distribution rule at contact points between the cylindrical rollers of the planet wheel and hypocycloidal ring gear. It is also necessary to calculate the force impact between rollers of the output shaft and cylindrical rollers in gear matching process. These are the main contents of this paper.
Downloads: 0
References
Marko Ristic, Milorad Kocic, Ana ALIL, Olivera Ilic, Jelena Ignjatovic; distribution of loads of cycloid speed reducer; scientific bulletin of the politehnica, university of timisoara, romania transactions on mechanics,(2011) pp 69-73.
Bingkui Chen , Hui Zhong, Jingya Liu, Chaoyang Li, Tingting Fang ; Generation and investigation of a new cycloid drive with double contact; Mechanism and Machine Theory 49 (2012), pp 270–283.
Won-Ki Nam and Se-Hoon Oh; A design of speed reducer with trapezoidal tooth profile for robot manipulator; Journal of Mechanical Science and Technology 25 (1) (2011) 171176.
Zbynˇek Šír, Bohumír Bastl, Miroslav Láviˇcka; Hermite interpolation by hypocycloids and epicycloids with rational offsets; Computer Aided Geometric Design 27 (2010) 405– 417.
Mirko Blagojević, Vera Nikolić-Stanojević, Nenad Marjanović, Ljiljana Veljović; Analysis of Cycloid Drive Dynamic Behavior; Scientific Technical Review,Vol.LIX,No.1, 2009, pp 52 – 56.
Joong-Ho Shin, Soon-Man Kwon; On the lobe profile design in a cycloid reducer using instant velocity center; Mechanism and Machine Theory 41 (2006), pp 596–616.
D. C. H. Yang, J. G. Blanche ; Design and application guidelines for cycloid drives with machining tolerances; Mech. Mach. Theory Vol. 25, No. 5,( 1990) pp. 487-501.
Dzmitry O. Tsetserukou, Vladimir L. Basinuk, Elena I. Mardosevich, Alena V. Neviarouskaya; Contact force distribution among pins of trochoid transmissions; XXI International Congress of Theoretical and Applied Mechanics;Warsaw, Poland, August 15-21, 2004;
Mirko Blagojević , Nenad Marjanović , Blaža Stojanović , Zorica Đorđević , Milorad Koeić, Influence of friction on the force distribution at cycloidal speed reducer; 12th International Conference on Tribology – Serbiatrib’11 (2011). pp 226-229.
Yunhong Meng, Changlin Wu, Liping Ling; Mathematical modeling of the transmission performance of 2K–H pin cycloid planetary mechanism; Mechanism and Machine Theory 42 (2007) 776–790.
Piermaria Davoli, Carlo Gorla, Francesco Rosa, Claudio Longoni, Franco Chiozzi, Alessandro Samarani; Theoretical and experimental analysis of a cycloidal speed reducer; Proceedings of PTG 2007, ASME 2007 10th ASME International Power Transmission and Gearing Conference, September 4-7, (2007), Las Vegas, USA.
K. Malhotra, M. A. ParamesWaran; Analysis of a cycloid speed reducer; Mechanism and Machine Theory Vol. 18, No. 6, (1983) pp. 491-499.
Downloads
Published
How to Cite
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
