Study on the effect of cycle time on the tensile strength and flexural strength of wood plastic composite
Corressponding author's email:
quachvt@hcmute.edu.vnKeywords:
wood plastic composite, cycle time, tensile strength, flexural strengthAbstract
The quality of wood plastic composite material is shown through factors such as tensile strength, flexural strength,… These factors have intimate relationship with cycle time. Therefore, the study determined the relationship of cycle time on the quality of materials is a viable research direction to increase production. This article presents the research results on the effect of cycle time on the tensile strength and flexural strength, which makes the determination of a reasonable cycle time and can be applied in practical production.
Downloads: 0
References
Nguyễn Đình Đức (2007). Công nghệ vật liệu compozit. Nhà xuất bản Khoa học kỹ thuật.
Đoàn Thị Thu Loan, (2010). Nghiên cứu cải thiện tính năng của vật liệu Composite sợi đay/ nhựa Polypropylene bằng phương pháp biến tính nhựa nền. Tạp chí khoa học và công nghệ, Đại học Đà Nẵng, Số 1(36)
Lý Tiểu Phương (2010). Nghiên cứu vật liệu phức hợp gỗ nhựa PP. Luận văn thạc sỹ, Đại học Đông Sơn, Trung Quốc
Anatole Klyosov (2007). Wood plastic composites. Wiley-interscience A John Wiley& Sons, INC, Publication. pp.163 – 172.
M. Kazayawoko and J.J. Balatinecz (1997). Adhesion mechanisms in woodfiber- polypropylene composites. 4th Inter- national Conference on Wood Fiber Plastic Composites, Madison, WI, May 12–14, pp. 81–93.
J.-R. Schauder (2003). Exxelor coupling agents for wood fibers reinforced composites, Wood fibre Polymer Composites Symposium. Application and Trends, Bordeaux, France, March 27–28.
Xanthos, M. (1983). Processing conditions and coupling agent effects in polypropylene/wood flour composites. Plast. Rubber Process. Appl. 3(3), pp.223- 228.
Behzad kord (2011). Influence of Maleic Anhydride on the Flexural, Tensile and Impact Characteristics of Sawdust Flour Reinforced Polypropylene Composite. World Applied Sciences Journal, 12 (7), 1014-1016.
Fauzi Febrianto, Dina Setyawati, Myrtha Karina, Edi Suhaimi Bakar and Yusuf Sudo Haidi (2006). Influence of Wood Flour and Modifier Contents on the Physical and Mechanical Propertes of Wood Flour-Recycle Polypropylene composites. Journal of Biological Sciences, 6 (2), pp. 337-343.
N. Sombatsompop, C. Yotinwattanakumtorn, C. Thongpin (2004). Influence of Type and concentration of maleic anhydride grafted polypropylene and Impact modifiers on Mechanical properties of PP/Wood Sawdust Composites. PP/Wood SawdustComposites, Published online in Wiley InterScience (www.interscience.wiley.com).
Downloads
Published
How to Cite
Issue
Section
Categories
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
