Mini channel heat exchanger
Corressponding author's email:
trungdt@hcmute.edu.vnKeywords:
radiator, minichannel heat exchanger, heat transfer rate, temperatureAbstract
The study was presented to design and manufacture a minichannel heat exchanger using UV light technology to bond between aluminum and PMMA (polymethyl methacrylate) plates together. The minichannel heat exchanger size is only 64% the size of the scooter radiator which made from manufacturer; however, the heat transfer rate obtained from the minichannel heat exchanger is higher than or equal to that obtained from the radiator, particularly when air velocity is from 1.2 m/s to 3.5 m/s and the mass flow rate of the fluid varies from 2.46g/s to 4.1g/s. In addition, when the minichannel heat exchanger is used, it
will take advantage of the forced convection by scooter moving, so the scooter will not need the fan as it is using.
Downloads: 0
References
P. K. Trivedi and N. B.Vasava, Effect of Variation in Pitch of Tube on Heat Transfer Rate in Automobile Radiator by CED Analysis, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249 – 8958, Volume-1, Issue-6, August 2012
JP Yadav and Bharat Raj Singh, Study on Performance Evaluation of Automotive Radiator, S-JPSET: ISSN: 2229-7111, Vol. 2, Issue 2, 2011
Pulkit Agarwal, Mayur Shrikhande and P. Srinivasan, Heat Transfer Simulation by CFD from Fins of an Air Cooled Motorcycle Engine under Varying Climatic Conditions, Proceedings of the World Congress on Engineering 2011 Vol III, WCE 2011, July 6 – 8, 2011, London, U.K.
Masao Yoshida, Soichi Ishihara, Yoshio Murakami, Kohei Nakashima and Masago Yamaoto, Air – cooling effects of Fins on a Motorcycle Engine, JSME International Juornal, Series B, Vol 49, No 3, 2006
Wamei Lin, Modeling and Performance Analysis of Alternative Heat Exchangers for Heavy Vehicles, Thesis for the degree of Licentiate of Engineering, 2011, Lund University
Arnold E. Biermann và Benjamin Pinkel, Heat transfer from finned metal cylinders in an air stream, Report National Advisory Committee for Aeronautics Collection
R. Chein, and J. Chen, Numerical study of the inlet/outlet arrangement effect on microchannel heat sink performance, International Journal of Thermal Sciences. Vol. 48, 2009, pp. 1627-1638
X. Wei, Stacked microchannel heat sinks for liquid cooling of microelectronics devices. Ph.D. thesis, Academic Faculty, Georgia Institute of Technology, 2004
S.G. Kandlikar, S. Garimella, D.Q. Li, S.Colin, and M.R. King, Heat transfer and fluid flow in minichannels and microchannels. Elsevier Pte Ltd., Singapore, 2006
Não Minh Daly, nghiên cứu cải tiến két nước trên xe tay ga bằng bộ tản nhiệt kênh Mini (Minichannel heat sink) nhằm nâng cao hiệu quả truyền nhiệt – Luận văn Thạc sĩ, Trường ÐH Sư phạm Kỹ thuật Tp. HCM, 2013.
Downloads
Published
How to Cite
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
