Space vector PWM method for Ultra sparse atrix converter using FPQA xc3s500e

Authors

  • Vu Tran Ho Chi Minh City University of Technology, Vietnam
  • Van Nho Nguyen Ho Chi Minh City University of Technology, Vietnam

Corressponding author's email:

tapchikhgkdt@hcmute.edu.vn

Keywords:

Ultra Sparse Matrix converter, Xilinx FPGA Spartan-3E XC3S500E

Abstract

 The Ultra Sparse Matrix converter (USMC) circuit, which simply consists of nine single switches, shows a great advantage to a much more burdensome conventional Matrix converter, which involves a double number of switches. Being due to this least number of switches, USMC is the most compact design. Despite its restricted requirement of unidirectional power flow applications, USMC has the same high quality output waveform of conventional Matrix converter. In this paper, a whole control algorithm of USMC was entirely designed on Xilinx XC3S500E Spartan-3E FPGA. The algorithm’s efficiency is verified through simulation and experiment work for switching strategy of USMC. Experimental results of switching gate signals are shown and compared to theoretical switching sequence. Experimental input and output waveforms are also analyzed.

Downloads: 0

Download data is not yet available.

References

L. Wei and T.A. Lipo, “A novel matrix converter with simple commutation”, In Proceedings of 36th IEEE Industry Applications Society Conference. (IAS’2001), vol.3, pp. 1749-1754, Chicago, IL, USA, 2001

L. Wei and T.A. Lipo, “Matrix converter with reduced number of switches”, In Proceeding of IEEE Power Electronics Specialist Conference, PESC 2002, pp.57-63

J.W. Kolar, F. Schafmeister, S.D. Round, H. Ertl, “Novel three-phase AC-AC sparse matrix converter”, IEEE Transactions on Power Electronics, Vol. 22, Issue 5, Sept. 2007, pp. 1649 – 1661.

J. Schonberger, T. Friedli, S.D. Round, J.W. Kolar, “An ultra sparse matrix converter with a novel active clamp circuit”, In Power Conversion Conference – Nagoya, 2007. PCC ’07, 2-5 April 2007 Page(s):784 - 791

Zhiyong Li, Hao Cai, Xiaoying Li, Xiangdong Kong, “Modulation Strategy Research for Dual Bridge Matrix Converter on DSP”, Measuring Technology and Mechatronics Automation, 2009. ICMTMA ‘09. International Conference on Volume 3, 11-12 April 2009 Page(s):396 - 399

Francesco Ricci, Hoang Le-Huy, “Modeling and simulation of FPGA-based variable-speed drives using Simulink”, In Proceedings of Mathematics and Computers in Simulation. 2003, 183-195

Jean-Gabriel Mailloux , Stephane Simard and Rachid Beguenane, “Implementation of Division and Square Root Using XSG for FPGA-Based Vector Control Drives”, International Journal of Electrical and Power Engineering 1 (5): 524-529, 2007.

Z. Zhou, T. Li, T. Takahashi and E. Ho, “Design of a universal space vector PWM controller based on FPGA”, Applied Power Electronics Conference and Exposition, 2004. APEC ‘04. Nineteenth Annual IEEE .

Su Mei, Xie Hong Jun, “Indirect Torque Control of Induction Motor Based on TwoStage Matrix Converter”, Intelligent Control and Automation, 2008. WCICA 2008. 7th World Congress on.

Published

28-12-2010

How to Cite

[1]
V. Tran and V. N. Nguyen, “Space vector PWM method for Ultra sparse atrix converter using FPQA xc3s500e ”, JTE, vol. 5, no. 4, pp. 7–15, Dec. 2010.

Issue

Section

Research Article

Categories