Control of doubly fed induction generator using internal model control method

Authors

  • Anh Vu Ho Đại Học Sư Phạm Kỹ Thuật Tp HCM
  • Hoai Nghia Duong Đại Học Bách Khoa - ĐHQG Tp HCM

Corressponding author's email:

tapchikhgkdt@hcmute.edu.vn

Keywords:

internal model, control method, doubly fed induction generator, control

Abstract

In this paper, we develop an internal model controller (IMC) for a doubly fed induction generator (DFIG). The plant is represented in the stator d-q reference frame and is a linear time-varying system. The main advantage of the proposed IMC controller is that it allows to specify the transfer function of the closed-loop system as well as the trade-off between the performance and the robustness of the control system. Simulation results are provided for illustration.

Downloads: 0

Download data is not yet available.

References

Lennart Harnefors, Hans-Peter Nee, ModelBased Current Control of AC Machines Using the Internal Model Control Method; IEEE Trans. Ind. Applicat, vol. 34, no. 1, February, 1998.

M. Campi, Wee Sit Lee, Brian D. O. Anderson, New Filter For Internal Model Control Design; International Journal of Robust And Nonlinear Control, vol. 4, 757–775, 1994.

R.Pena, J.C.Clare, G. M. Asher, “Doubly Fed Induction Generator Using Back-To-Back PWM Converters and its Application to VariableSpeed Wind-Energy Generation”; IEEE Proc.-Electr. Power Appl., Vol. 143, No. 3, May, l996.

R. Galindo, M. Cotorogea, D. Biel, “Two Families of Sliding Mode Controllers for a Doubly-Fed Induction Generator in an Isolated Generation System”; Proceeding of 24 electronic, Robotics and automative mechanics conferences, IEEE,

S. Seman, J. Niiranen, S. Kanerva, and A. Arkkio, “Analysis of a 1.7 MVA Doubly Fed Wind-Power Induction Generator During Power Systems Disturbances”; IEEE, Electric Power Components and Systems, No. 30, pp199-216, 2002.

Tapia A., Ostolaza X., Sa1enz J.r, Modelling and Control of a Wind Turbine Driven Doubly Fed Induction Generator; IEEE Trans. on Energy Conversion 2003.

M. Morari and E. Zafiriou, Robust Process Control. Prentice-Hall, 1987.

Dương Hoài Nghĩa, Điều Khiển Hệ Thống Đa Biến; NXB ĐHQG Tp HCM, 2007.

Downloads

Published

29-06-2010

How to Cite

[1]
A. V. Ho and H. N. Duong, “Control of doubly fed induction generator using internal model control method”, JTE, vol. 5, no. 2, pp. 17–24, Jun. 2010.

Issue

Section

Research Article

Categories