Xây Dựng Hệ Thống Đo Lường Mức Độ Đạt Chuẩn Đầu Ra Chương Trình Đào Tạo – Mô Hình Áp Dụng Tại Đại Học Sư Phạm Kỹ Thuật Thành Phố Hồ Chí Minh

Các tác giả

  • Thị Thu Thủy Phan Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam
  • Huy Tuân Phạm Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam
  • Xuân Tiến Võ Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam

Email tác giả liên hệ:

thuyptt@hcmute.edu.vn

DOI:

https://doi.org/10.54644/jte.75B.2023.1292

Từ khóa:

Chuẩn đầu ra chương trình đào tạo, Đo lường chuẩn đầu ra, Mô hình đo lường chuẩn đầu ra, Quy trình đo lường chuẩn đầu ra, Biểu mẫu đo lường chuẩn đầu ra

Tóm tắt

Chất lượng của chương trình đào tạo (CTĐT) ngày càng được xã hội quan tâm. Việc đạt chuẩn đầu ra (CĐR) CTĐT là một trong những điều kiện để sinh viên được xét và công nhận tốt nghiệp theo Quy chế đào tạo trình độ đại học ban hành kèm Thông tư số 08/2021/TT-BGDĐT và cũng là yêu cầu bắt buộc trong bộ tiêu chuẩn đánh giá chất lượng AUN-QA cấp CTĐT version 4.0 của Mạng lưới các trường đại học Đông Nam Á. Hiện nay, các trường đại học tại Việt Nam đang ở giai đoạn đầu trong quá trình xây dựng và hình thành các phương pháp, công cụ đo lường. Nhóm tác giả đã sử dụng phương pháp nghiên cứu định lượng kết hợp định tính thông qua ý kiến phản hồi của giảng viên và các kết quả đo lường mức độ đạt CĐR CTĐT áp dụng thí điểm tại trường đại học Sư phạm Kỹ thuật TP.HCM trong 3 năm học 2019-2020, 2020-2021 và 2021-2022, bài viết trình bày thực trạng triển khai từ đó đề xuất mô hình đo lường tổng quan, quy trình và biểu mẫu hướng dẫn đo lường CĐR phù hợp với các điều kiện thực tế của Nhà trường để bắt đầu áp dụng từ năm học 2022-2023 nhằm đảm bảo chất lượng đào tạo, đáp ứng yêu cầu của quy chế đào tạo và các bộ tiêu chuẩn đánh giá/kiểm định chất lượng trong nước và quốc tế.

Tải xuống: 0

Dữ liệu tải xuống chưa có sẵn.

Tiểu sử của Tác giả

Thị Thu Thủy Phan, Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam

Phan Thi Thu Thuy received a B.Eng degree in Mechatronics Engineering from Ho Chi Minh City University of Technology and Education (HCMUTE), Vietnam in 2006, and M.Eng degree in Industrial Engineering from Chonnam National University, South Korea in 2008. From 2009 to 2013, she worked in Mechatronics Department at the Faculty of Mechanical Engineering, HCMUTE. Since 2013, she has worked at Quality Assurance Office as Deputy Head of Office. Her research interest includes pneumatics and hydraulics system, automation system and quality assessment/accreditation in higher education

Huy Tuân Phạm , Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam

Huy-Tuan Pham received the B.S. degree in mechanical engineering from Ho Chi Minh City University of Technology, Vietnam, in 2005, the M.S. degree and Ph.D. degree in precision engineering from National Chung Hsing University, Taichung, Taiwan, in 2008 and 2011. He is currently an Associate Professor at Ho Chi Minh City University of Technology and Education (HCMUTE), Vietnam.
From 2012 to 2018, he worked at the Faculty of Mechanical Engineering, HCMUTE. Since 2018 he has been a deputy head of the Quality Assurance Office. His research interest includes compliant mechanisms and their applications, ultrasonics and vibration-assisted machining methods, and assessment/accreditation in higher education.

Xuân Tiến Võ, Trường Đại học Sư phạm Kỹ thuật Tp.HCM, Việt Nam

Xuan-Tien Vo received the B.S. degree in industrial engineering from Ho Chi Minh City University of Technology, Vietnam, in 2004, the M.S. degree in technical vocational education and training (TVET) from Otto-von-Guericke University Magdeburg, Germany in 2010 and Ph.D. degree in TVET from Technology University, Chemnitz, Germany, in 2020. He works currently at Ho Chi Minh City University of Technology and Education (HCMUTE), Vietnam.
From 2007 until now, he worked as Lecturer at the Faculty of Mechanical Engineering, HCMUTE and does research on TVET, foundry technology as well as materials engineering.

Tài liệu tham khảo

Vietnamese Ministry of Education and Training. (2021, Mar. 18). No. 08/2021/TT-BGDĐT, Regulation on Training at the University Level.

M. L. A. Stassen, K. Doherty, and M. Poe, "Course-Based Review and Assessment - Methods for Understanding Student Learning," Office of Academic Planning and Assessment (OAPA), pp. 25-34, 2001.

O. Z. Troitschanskaia, M. Toepper, H. A. Pant, C. Lautenbach, and C. Kuhn, "Assessment of Learning Outcomes in Higher Education," Cross-National Comparisons and Perspectives, pp. 246-266, 2018.

T. Melguizo, G. Zamarro, T. Velasco, and F. J. Sanchez, "The Methodological Challenges of Measuring Student Learning, Degree Attainment, and Early Labor Market Outcomes in Higher Education," Journal of Research on Educational Effectiveness, pp. 424–448, 2016.

H. Coates, "What's the Difference? A Model for Measuring the Value Added by Higher Education in Australia," Higher Education Management and Policy, vol. 21, no. 1, pp. 69–88, 2009.

BTEC Centre Guide to Managing Quality, Pearson BTEC, Pearson Education Ltd., UK, 2017, pp. 19-28.

L. Goff et al., "Learning Outcomes Assessment: A Practitioner's Handbook," Higher Education Quality Council of Ontario, 2015.

D. T. Viet and T. T. H. Van, "Chapter 3. Measurement and Evaluation of the Achievement of Learners' Outcomes," in Development, Quality Assurance of Training Programs, and Measurement and Evaluation of Outcomes Standards, (in Vietnamese) Information and Communication Publishing House, 2021, pp. 78-113,

L. K. Linh, “Assessment Model of Learning Outcomes According to Standards for Students in the Economics Field," (in Vietnamese), Ph.D dissertation, Institute of Technical Education, Ho Chi Minh City University of Technology and Education, 2022.

Faculty of Chemical and Food Technology – Ho Chi Minh City University of Technology and Education, "Self-Assessment Report for AUN-QA Assessment, Bachelor of Engineering in Chemical Engineering Technology," The 305th AUN-QA Programme Assessment, 29 Nov. – 01 Dec., 2022.

Faculty of Economics – Ho Chi Minh City University of Technology and Education, "Self-Assessment Report for AUN-QA Assessment, Bachelor of Arts in Accounting," The 305th AUN-QA Programme Assessment, 29 Nov. – 01 Dec., 2022.

Quality Assurance Office – Ho Chi Minh City University of Technology, "Report on the Results of the Survey of Lecturers' Opinions on the Status of Measuring the Achievement of Outcomes in the Training Program, No. 20/BC-QA issued on July 14, 2022," (in Vietnamese), 2022.

BUILD-IT, "Effective Assessment and Evaluation of Student Outcome Attainment," 2022.

Tải xuống

Đã Xuất bản

2023-02-28

Cách trích dẫn

[1]
T. T. T. Phan, H. T. Phạm, và X. T. Võ, “Xây Dựng Hệ Thống Đo Lường Mức Độ Đạt Chuẩn Đầu Ra Chương Trình Đào Tạo – Mô Hình Áp Dụng Tại Đại Học Sư Phạm Kỹ Thuật Thành Phố Hồ Chí Minh ”, JTE, vol 18, số p.h Special Issue 02, tr 1–12, tháng 2 2023.

Số

Chuyên mục

Bài báo khoa học

Categories