Designing and Manufacturing a Vacuum Frying System with Intelligent Controlling
Email tác giả liên hệ:
tandzung072@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.77.2023.1374Từ khóa:
Vacuum Frying, Moist Material, Smart control, Calculating, DesigningTóm tắt
Vacuum frying is one of the advanced technologies for food processing to make high-quality fried products by decreasing smoked temperature of oil. In this study, the vacuum frying system was calculated, designed, and manufactured using potato slices as material. The system was successfully manufactured using shortening as the frying oil and the optimal frying conditions were 105ºC, 150 mmHg for 10 minutes. The frying process was automatically controlled and measured by computer-programmed software. The system consists of a heat power (6.33 kW), a cylinder frying tank (400 mm diameter × 750 mm height), a vacuum pump (0.75 kW, a condensing equipment (0.45 kW, 30mm diameter × 440 mm length), and a freezing compressor (1.12 kW). The frying capacity of the system is 24 kg material for 4 hours, consisting of 12 frequencies (20 minutes of frying time for 2 kg material for each). After manufacturing, the system was used for frying potatoes to test and assess the effectiveness and adjust the optimal conditions. The fried potato indicated the required moisture, suitable quality, typical color and taste, and low energy costs. This result can help to master vacuum frying manufacturing technology for domestic engineering.
Tải xuống: 0
Tài liệu tham khảo
A. A. Bello et al., "Vacuum Frying: An Alternative to Obtain High-Quality Dried Products," Food Engineering Reviews, vol. 3, no. 2, pp. 63-78, 2011.
D. S. Ahmad, L. Sugiyarto, B. Solichatun, and A. Susilowati, "Review: Physical, physical chemistries, chemical and sensorial characteristics of the several fruits and vegetable chips produced by low-temperature of vacuum frying machine," Bioscience, vol. 5, no. 2, pp. 86-103, 2013.
F. D. Gunstone, Vegetable Oils in Food Technology: Composition, Propertiesand Uses, Hoboken, New Jersey, U.S.: John Wiley & Sons, 2011.
“Smoke Point of different Cooking Oils.” ChartsBin.com. http://chartsbin.com/view/1962 (accessed Mar. 30, 2011).
S. Manzoor, F. A. Masoodi, R. Rashid, and T. A. Ganaie, "Quality changes of edible oils during vacuum and atmospheric frying of potato chips," Innovative Food Science & Emerging Technologies, vol. 82, p. 103185, 2022.
E. Choe and D. B. Min, "Chemistry of Deep-Fat Frying Oils," Journal of Food Science, vol. 72, no. 5, pp. R77-R86, 2007, doi: 10.1111/j.1750-3841.2007.00352.x.
A. Negre-Salvayre et al., "Pathological aspects of lipid peroxidation," Free Radical Research, vol. 44, no. 10, pp. 1125-1171, 2010.
J. Garayo and R. Moreira, "Vacuum frying of potato chips," Journal of Food Engineering, vol. 55, no. 2, pp. 181-191, 2002.
L. T. T. Long et al., "Modeling the freezing process of turmeric starch to determine the rate of freezing water," Journal of Technical Education Science, no. 46, pp. 1-9, 2018.
N. T. Dzung and N. D. M. Duyen, "Multi-objective optimization to determine the cold drying mode of gac (momordica cochinchinensis spreng)," Carpathian Journal of Food Science & Technology, vol. 12, no. 3, pp. 23-34, 2020.
V. D. Phuong and N. T. Dzung, "The Multi-objective Optimization by the Restricted Area Method to Determine the Technological Mode of Cold Drying Process of Carrot Product," Research Journal of Applied Sciences, Engineering and Technology, vol. 13, no. 1, pp. 64-74, 2016.
D. T. H. Hai and N. T. Dzung, "The Multi-objective Optimization by the Utopian Point Method to Determine the Technological Mode of Infrared Radiation Drying Process of Jackfruit Product in Viet Nam," Research Journal of Applied Sciences, Engineering and Technology, vol. 13, no. 1, pp. 75-84, 2016.
N. T. Dzung, T. V. Dzung, and T. D. Ba, "Building the method to determine the rate of freezing water in penaeus monodon of the freezing process," Carpathian Journal of Food Science & Technology, vol. 4, no. 2, pp. 243-248, 2012.
L. T. K. Vu, P. Q. Pham, D. T. A. Phan, and N. T. Dung, "Building and solving the mathematical model of transient heat transfer during the peanut roasting process to determine the roasting parameters," Carpathian Journal of Food Science & Technology, vol. 14, no. 4, 2022, doi: 10.34302/crpjfst/2022.14.4.6.
N. T. Dzung, H. V. Chuyen, L. V. T. Khanh et al., Freeze Drying, Ho Chi Minh City, Vietnam: HCMC-VNU Press, 2022, p. 592.
Tải xuống
Đã Xuất bản
Cách trích dẫn
Số
Chuyên mục
Categories
Giấy phép
Bản quyền (c) 2023 Tạp chí Khoa học Giáo dục Kỹ Thuật - ĐH SPKT TP.HCM
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
