Effect of treatment condition on perovskite film for perovskite solar cell application
Email tác giả liên hệ:
hophuong@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.67.2021.1092Từ khóa:
Perovskite solar cells, Perovskite materials, two-step sequential solution deposition, treatment condition, power conversion efficiencyTóm tắt
In this study, the Perovskite material CH3NH3PbI3 was prepared using two-step sequential solution deposition technique. The treatment condition for Perovskite film including dipping duration, reaction temperature and annealing temperature was studied. Crystal structure, grain size, and purity of the prepared material were examined using XRD and SEM methods. The results indicate that controlling treatment condition has a significant effect on the crystallinity and purity of Perovskite film. Under suitable condition, the obtained Perovskite material has a tetragonal structure and grain size ranges from 200 to 400 nm. The Perovskite film was then applied as a light-harvesting material in Perovskite solar cell. The device exhibits a power conversion efficiency of 5.18% with JSC of 13.6 mA cm-2, VOC of 0.83 V, and fill factor of 45.9%.
Tải xuống: 0
Tài liệu tham khảo
Kojima, A., et al., Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells. Journal of the American Chemical Society, 2009. 131(17): p. 6050-6051. DOI: https://doi.org/10.1021/ja809598r
https://www.nrel.gov/pv/cell-efficiency.html. 2020.
Shaikh, J.S., et al., Perovskite solar cells: In pursuit of efficiency and stability. Materials & Design, 2017. 136(Supplement C): p. 54-80. DOI: https://doi.org/10.1016/j.matdes.2017.09.037
Djurišić, A.B., et al., Perovskite solar cells - An overview of critical issues. Progress in Quantum Electronics, 2017. 53(Supplement C): p. 1-37. DOI: https://doi.org/10.1016/j.pquantelec.2017.05.002
Park, N.-G., M. Grätzel, and T. Miyasaka, Organic-Inorganic Halide Perovskite Photovoltaics. Springer, 2016. DOI: https://doi.org/10.1007/978-3-319-35114-8
Green, M.A., A. Ho-Baillie, and H.J. Snaith, The emergence of Perovskite solar cells. Nature Photonics, 2014. 8(7): p. 506-514. DOI: https://doi.org/10.1038/nphoton.2014.134
Burschka, J., et al., Sequential deposition as a route to high-performance Perovskite-sensitized solar cells. Nature, 2013. 499(7458): p. 316-319. DOI: https://doi.org/10.1038/nature12340
Zhou, H., et al., Interface engineering of highly efficient Perovskite solar cells. Science, 2014. 345(6196): p. 542-546. DOI: https://doi.org/10.1126/science.1254050
Kim, H.-S., et al., Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%. Scientific Reports, 2012. 2: p. 591. DOI: https://doi.org/10.1038/srep00591
Hagfeldt, A., et al., Dye-Sensitized Solar Cells. Chemical Reviews, 2010. 110(11): p. 6595-6663. DOI: https://doi.org/10.1021/cr900356p
Chan, D.S.H. and J.C.H. Phang, Analytical methods for the extraction of solar-cell single- and double-diode model parameters from I-V characteristics. IEEE Transactions on Electron Devices, 1987. 34(2): p. 286-293. DOI: https://doi.org/10.1109/T-ED.1987.22920
Tải xuống
Đã Xuất bản
Cách trích dẫn
Số
Chuyên mục
Categories
Giấy phép
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
