Modeling and Simulation of PID Controller-Based Active Suspension System for A Quarter Car Model
Email tác giả liên hệ:
trangnv@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.68.2022.1126Từ khóa:
EnglishTóm tắt
The most common automotive suspension systems have been used passive components with fixed damping coefficient and spring constant. They are two separate functions to reach a compromise between drive quality and handling performance. Because of the limit of structures, the passive suspension system could hardly enhance the two features at the same time. In recent years, the active suspension system has been widely used in a vehicle which can overcome the limitations of the passive suspension systems. Since there are many advantages to make the vehicle operate safer and quieter than the passive suspension system. The aim of this study is to develop a linear mathematical model of active and passive suspensions systems for quarter car models subjected to different road profiles using a Proportional Derivative Integral (PID) controller. After modeling and simulation of the suspension system using Matlab/Simulink, this study has been able to determine the parameter of PID controllers of active suspension in many different road surfaces and vehicle speeds to improve driving comfort. Another new point of this study is the Graphical User Interfaces to be a successful design. The users can enter the input parameters for Matlab processing and get the results, which can make system analysis faster and more convenient. The main outcomes of this paper are performed to investigate and compare the response between active and passive suspension systems. Through the analysis of the simulation results, this research has demonstrated the feasibility, reliability, and they can be applied to propose a further improvement of the kinematic and dynamic characteristics of the vehicle active suspension system.
Tải xuống: 0
Tài liệu tham khảo
Qi Zhou. “Research and Simulation on New Active Suspension Control System”. Theses and Dissertations, Paper 1700, 2013.G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York, NY, USA: McGraw-Hill, 1964, pp. 15–64.
K.Dhananjay Rao. “Modeling, Simulation and Control of Semi Active Suspension System for Automobiles under MATLAB Simulink using PID Controller”. Third International Conference on Advances in Control and Optimization of Dynamical Systems, 2014, pp.827-831. DOI: https://doi.org/10.3182/20140313-3-IN-3024.00094
Rajesh Rajamani. “Vehicle Dynamics and Control. Springer”, 2012, pp.268-270. DOI: https://doi.org/10.1007/978-1-4614-1433-9
Musa Mohammed Bello, Amir Akramin Shafie, Raisuddin Md. Khan. “Electro-Hydraulic PID Force Control for Nonlinear Vehicle Suspension System”. International Journal of Engineering Research & Technology (IJERT), Vol. 4, pp. 517-524, Janualy 1, 2015.
International Standard. “Mechanical vibration and shock-Evaluation of human exposure to whole-body vibration -ISO 2631-1-1997”.
“Mechanical Vibration-Road surface profiles- Reporting of measured data-ISO 8608:1995”.
Mouleeswaran Senthil Kumar, Member, Iaeng. “Development of Active Suspension System for Automobiles using PID Controller”. Proceedings of the World Congress on Engineering 2008, Vol. 2, pp.3-7, July 2008.
Vladimír Goga, Marian Kl’úcik. “Optimization of vehicle suspension parameters with use of evolutionary computation”. Procedia Engineering, Vol.48, pp.174-179, 2012. DOI: https://doi.org/10.1016/j.proeng.2012.09.502
XueMei Sun, Yaxu Chu, Jiuchen Fan, Qiuxiao Yang. “Research of Simulation on the Effect of Suspension Damping on Vehicle Ride”. Energy Procedia, Vol.17, pp.145-151, 2012. DOI: https://doi.org/10.1016/j.egypro.2012.02.075
Yong Yang, Weiqun Ren, Liping Chen, Ming Jiang, Yuliang Yang. “Study on ride comfort of tractor with tandem suspension based on multi-body system dynamics”. Science Direct, Vol.33, pp.11-33, 2009. DOI: https://doi.org/10.1016/j.apm.2007.10.011
Prof. Pranesh B. Bamankar, Gayatri V. Joshi. “A review on vibrational analysis of suspension system for quarter and half car model with various controllers”. International Journal of Advanced Engineering Research and Studies, Vol.7, pp.1-3, 2015.
Mohammed H. AbuShaban, Mahir B. Sabra, Iyad M. Abuhadrous. “An Optimized PID Control Strategy For Active Suspensions Applied To A Half Car Model”. World of Computer Science and Information Technology Journal (WCSIT), Vol.3, pp.26-31, 2013.
S. H. Hashemipour, M. Rezaei lasboei and M. Khaliji. “A Study of the Performance of the PID Controller and Nonlinear Controllers in Vehicle Suspension Systems Considering Practical Constraints”. Research Journal of Recent Sciences, Vol.3, pp.86-95, August 2014.
Ayman A. Aly, A. Al-Marakeby, Kamel A. Shoush. “Active Suspension Control of a Vehicle System Using Intelligent Fuzzy Technique”. International Journal of Scientific & Engineering Research, Vol. 4, October 2013.
Rosmazi Rosli, Musa Mailah, Gigih Priyandoko. “Active Suspension System for Passenger Vehicle using Active Force Control with Iterative Learning Algorithm”. WSEAS Transactions on Systems and Control, Vol. 9, pp. 121-129, 2014.
Jiangbo Wang, and Baomin Qiang. “Road simulation for four-wheel vehicle whole input power spectral density”. AIP Conference Proceedings 1839, pp. (020147-1) – (020147-6), 2017. DOI: https://doi.org/10.1063/1.4982512
Qi Zhou. “Research and Simulation on New Active Suspension Control System”. Lehigh University, 2013.
Sayel M. Fayyad. “Constructing Control System for Active Suspension System”. Constructing Control System for Active Suspension System, Vol. 5, pp. 189-200, 2012.
Tan, D.; Lu, C. “The influence of the magnetic force generated by the in-wheel motor on the vertical and lateral coupling dynamics of electric vehicles. IEEE Trans”. Veh. Technol. 2016, 65, 4655–4668. DOI: https://doi.org/10.1109/TVT.2015.2461635
T. P. Phalke, A. C. Mitra. “Comparison of passive and semi-active suspension system by MATLAB SIMULINK for different road profiles”. IOSR Journal of Mechanical & Civil Engineering (IOSRJMCE), pp. 38-42, 2016. DOI: https://doi.org/10.9790/1684-1500838-43
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2022 Tạp chí Khoa học Giáo dục Kỹ Thuật - ĐH SPKT TP.HCM
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
