Enhanced Performance of Perovskite Solar Cell via Controlling Layer Thickness
Email tác giả liên hệ:
hophuong@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.77.2023.1398Từ khóa:
Perovskite solar cell, Power conversion efficiency, Blocking layer, Mesoporous layer, Perovskite layerTóm tắt
In this study, Perovskite material methylammonium lead iodide (CH3NH3PbI3) was successfully fabricated using a two-step sequential solution deposition method. The precursor solution of lead iodide was first spin-coated, followed by immersing the film into a solution of CH3NH3I to form the Perovskite layer. The Perovskite material was then successfully applied as a light-harvesting material in Perovskite solar cells. The power conversion efficiency of the devices was optimized by varying TiO2 blocking layer, TiO2 mesoporous layer, and perovskite capping layer thickness. The best Perovskite solar cell exhibits a power conversion efficiency of 7.72% with a short-circuit photocurrent density JSC of 17.26 mA/cm2, an open-circuit photovoltage VOC of 0.94 V, and a fill factor of 47.6%; with the thicknesses of TiO2 blocking layer, TiO2 mesoporous layer, and perovskite capping layer of 100 nm, 200 nm, and 400 nm, respectively. The results show that Perovskite material has potential for solar cell application.
Tải xuống: 0
Tài liệu tham khảo
P. Roy, N. Kumar Sinha, S. Tiwari, and A. Khare, "A review on perovskite solar cells: Evolution of architecture, fabrication techniques, commercialization issues and status," Solar Energy, vol. 198, pp. 665-688, 2020.
A. B. Djurišić et al., "Perovskite solar cells - An overview of critical issues," Progress in Quantum Electronics, vol. 53, pp. 1-37, 2017.
N. G. Park, M. Grätzel, and T. Miyasaka, Organic-Inorganic Halide Perovskite Photovoltaics, Springer, 2016.
C. H. Lee et al., "Preparation and Characterization of Squaraine Dyes containing Mono-and Bis-Anchoring Groups as the Light Absorber in Dye-Sensitized Solar Cells," Electrochimica Acta, vol. 138, pp. 148-154, 2014.
A. S. R. Bati et al., "Next-generation applications for integrated perovskite solar cells," Communications Materials, vol. 4, no. 1, p. 2, 2023.
M. A. Green, A. H. Baillie, and H. J. Snaith, "The emergence of perovskite solar cells," Nature Photonics, vol. 8, no. 7, pp. 506-514, 2014.
M. K. Assadi, S. Bakhoda, R. Saidur, and H. Hanaei, "Recent progress in perovskite solar cells," Renewable and Sustainable Energy Reviews, vol. 81, no. Part 2, pp. 2812-2822, 2018.
A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, "Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells," J. Am. Chem. Soc., vol. 131, no. 17, pp. 6050-6051, 2009.
H. Min et al., "Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes," Nature, vol. 598, no. 7881, pp. 444-450, 2021.
P. Vivo, J. K. Salunke, and A. Priimagi, "Hole-Transporting Materials for Printable Perovskite Solar Cells," Materials, vol. 10, no. 9, p. 1087, 2017.
J. Burschka et al., "Sequential deposition as a route to high-performance perovskite-sensitized solar cells," Nature, vol. 499, pp. 316-319, 2013.
H. Zhou et al., "Interface engineering of highly efficient perovskite solar cells," Science, vol. 345, pp. 542-546, 2014.
H. S. Kim et al., "Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%," Scientific Reports, vol. 2, p. 591, 2012.
H. J. Snaith, "How should you measure your excitonic solar cells?," Energy & Environmental Science, vol. 5, no. 4, pp. 6513-6520, 2012.
A. Hagfeldt et al., "Dye-Sensitized Solar Cells," Chemical Reviews, vol. 110, no. 11, pp. 6595-6663, 2010.
D. S. H. Chan and J. C. H. Phang, "Analytical methods for the extraction of solar-cell single- and double-diode model parameters from I-V characteristics," IEEE Transactions on Electron Devices, vol. 34, no. 2, pp. 286-293, 1987.
E. T. Veiga, S. L. Fernandes, C. F. d. O. Graeff, and A. S. Polo, "Compact TiO2 blocking-layer prepared by LbL for perovskite solar cells," Solar Energy, vol. 214, pp. 510-516, 2021.
S. Du et al., "Impact of Precursor Concentration on Perovskite Crystallization for Efficient Wide-Bandgap Solar Cells," Materials, vol. 15, no. 9, p. 3185, 2022.
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2023 Tạp chí Khoa học Giáo dục Kỹ Thuật - ĐH SPKT TP.HCM
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
