Numerical Simulation and Experimental Study of Thermal Distribution Behavior in Downdraft Ceramic Kiln
Email tác giả liên hệ:
wuttikid@gmail.comDOI:
https://doi.org/10.54644/jte.78B.2023.1440Từ khóa:
Downdraft kiln, Stoneware ceramic, Thermal distribution, CFD model, ThermocoupleTóm tắt
This research aims to study and analyze thermal distribution behavior in 3.6 m3 downdraft kiln containing standard 10 layers and 250 kg ceramic shelf. This understanding is expected to solve the waste product problem of stoneware ceramic affected by uneven inside temperature. Thermal distribution was analyzed by thermocouple measuring simultaneously CFD method. Regularly, R - type thermocouples measurements were permanently installed for 8 points around the kiln, front middle and rear top, door, mid - rear wall, side wall, chimney and burner. These measuring results compared to CFD show the trend. The temperature on the top kiln was higher than that bottom. The average temperature on the top kiln was around 1,160°C whereas that on the bottom kiln was around 850°C. The CFD results were error from thermocouple measuring for -2 to 5%. However, CFD results also show thermal distribution behavior at the immeasurable point from thermocouple. The temperature distribution on the bottom kiln was uneven. The temperature nearby the front kiln was slightly lower than that rear kiln because the outlet vent to the chimney is near rear kiln.
Tải xuống: 0
Tài liệu tham khảo
F. Norton, Ceramics for the Artist Potter. Cambridge, MA: Addiron, ed: Wesley Publishing Co., Inc, 1956.
T. Fongsamootr and N. Doungsupa, "Simulation of Combustion in Ceramic Fiber Kiln using Computational Fluid Dynamics," WSEAS Transactions on Fluid Mechanics, vol. 1, no. 1, p. 16, 2006.
T. S. Possamai, R. Oba, V. Nicolau, and O. Otte, "Numerical simulation of a ceramic kiln used in frits production," in 20th International Congress of Mechanical Engineering, Gramado, RS, Brazil COB09, 2009, vol. 1152.
Z. Zhang, J. Feng, and W. Liu, "Firing Simulation Studies of Household Porcelain in Shuttle Kilns," in International Conference on Computer Information Systems and Industrial Applications, 2015: Atlantis Press, pp. 804-807.
K. Krumov and N. Penkova, "Numerical analysis of the transient heat transfer in high temperature chamber furnaces," in IOP Conference Series: Materials Science and Engineering, 2019, vol. 595, no. 1: IOP Publishing, p. 012005.
K. S. Krumov and N. Y. Penkova, "Improvement of the Conjugate Heat Transfer in High Temperature Chamber Furnaces for Firing of Ceramic Ware," Journal of Civil Engineering and Architecture, vol. 13, pp. 265-272, 2019.
M. Romero-Flores, A. D. Tapia-Martínez, K. Mariella-González, A. Cantú-Pérez, and A. Montesinos-Castellanos, "Temperature uniformity evaluation of a shuttle kiln for the sanitary ware industry using CFD," (in EN), Combustion Theory and Modelling, vol. 24, no. 6, pp. 1070-1089, 2020.
U. Adhikari, B. Prajapati, and A. M. Bhandari, "Performance evaluation and thermal analysis of pottery furnace in Thimi, Bhaktapur," Journal of Innovations in Engineering Education, vol. 4, no. 2, pp. 128-137, 2021.
L. Punsukmtana et al., "A comparative study of the firing shrinkage properties of the process temperature control rings," (in TH), Bulletin of Applied Sciences, vol. 03, no.3, p. 9, 2014.
H. Danninger, Ch. Xu, Ch. Gierl, A. Avakemian, and M.-Ch. Huemer, "In-Situ Characterization of The Sintering Process Through Process-Temperature Control Rings.," (in EN), Powder Metallurgy Progress, internet vol. 12, 3, pp. 168-180, 2012. [Online]. Available: http://www.imr.saske.sk/pmp/c03_2012.html.
S. Ferrer, A. Mezquita, M. P. Gómez-Tena, C. Machí, and E. Monfort, "Estimation of the heat of reaction in traditional ceramic compositions," Applied Clay Science, vol. 108, pp. 28-39, 2015.
F. Smith, D. Wagoner, and A. Nelson, "Guidelines for Development of a Quality Assurance Program: Volume I. Determination of Stack Gas Velocity and Volumetric Flow Rate(Type-S Pitot Tube)," 1974.
J. Tu, G. H. Yeoh, and C. Liu, Computational Fluid Dynamics A Practical Approach. Oxford ,UK: Elsevier (in EN), 2008.
W. L. McCabe, J. C. Smith, and P. Harriott, Unit operations of chemical engineering. McGraw-hill New York, 1993.
JIS C series Insulating Firebrick, Japan, 2016. [Online]. Available: https://www.isolite.co.jp/en/products/taika/c_insulation/.
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2023 Tạp chí Khoa học Giáo dục Kỹ Thuật - ĐH SPKT TP.HCM
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
