Design of the Optimum Heat Pipe Heat Exchanger to Recover Heat From Flue Gas of Boiler in case of Chiang Mai Orchid Hotel, Thailand

Các tác giả

  • Soonthorn Sriwiga Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Ronnachart Munsin Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Thanawat Watcharadumrongsak Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Somkiat Wongpanich Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Kwanchai Kraitong Naresuan University , Phitsanulok, Thailand
  • Arwut Lapirattanakun Naresuan University , Phitsanulok, Thailand
  • Autanan Wannachai Chiang Mai University , Chiang Mai, Thailand
  • Surapin Promdan Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Nuttarut Panananda Rajamangala University of Technology Lanna, Chiang Mai, Thailand
  • Pracha Yeunyongkul Rajamangala University of Technology Lanna,Thailand

Email tác giả liên hệ:

ypracha@rmutl.ac.th

DOI:

https://doi.org/10.54644/jte.78B.2023.1446

Từ khóa:

heat pipe heat exchanger, boiler, greenhouse gas, effectiveness, net saving

Tóm tắt

This study aims to design the optimum heat pipe heat exchanger (HPHE) to recover heat from flue gas of boiler for increasing the temperature of feed water. The optimum thermosyphon heat exchanger sizing was simulated on the basis of thermo-economical method and simulation program was construct by using the MATLAB 2021b. The program was simulated by input physical parameters of the thermosyphon and heat exchanger and the thermoeconomic parameters. It was found that R134a was chosen as the working fluid of this study.  In addition, the optimum of number of tubes, heat transfer rate and the optimized effectiveness of HPHE were 87 tubes, 4,873 W and 0.237, respectively. Moreover, the net saving and payback period of this HPHE were 14,865 USD and 310 days, respectively.

Tải xuống: 0

Dữ liệu tải xuống chưa có sẵn.

Tiểu sử của Tác giả

Soonthorn Sriwiga , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Soonthorn Sriwiga is a lecturer at Chiang Mai Technical College (CMTC). He is studying master's degree in Mechanical Engineering at Rajamangala University of Technology Lanna. His research interests waste heat recovery and heat exchanger design. Email: soonthorn_sr64@live.rmutl.ac.th

Ronnachart Munsin , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Ronnachart Munsin works as a lecturer at Rajamangala University of Technology Lanna (RMUTL). He worked as a postdoctoral fellow at the Université d' Orléans, France in 2016. He received his D.Eng. in mechanical engineering from King Mongkut’s University of Technology Thonburi (KMUTT) in 2015, M.Eng. in mechanical engineering from Chiang Mai University in 2008 and B.Eng. in agricultural engineering from Maejo University in 2004. He was an intern at Tokyo Institute of Technology for research work in 2011. His research focus on sustainable technology, agricultural engineering and combustion. His awards and honors include the Research Fellowship from the Labex CAPRYSSES, supported by the National French Agency, the Research Fellowship from the National Research Council of Thailand, the Royal Golden Jubilee Ph.D. Program, the Fellowship from the JSAE Kanto and the DIPROM Agro-Machinery Award 2022. Email: ronnachart@rmutl.ac.th

Thanawat Watcharadumrongsak , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Thanawat Watcharadumrongsak is working as an instructor at Rajamangala University of Technology Lanna. He received doctor degree in Mechanical Engineering from Chiang Mai University. His research focus on heat transfer and application. Email: thanachak@rmutl.ac.th

Somkiat Wongpanich , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Somkiat Wongpanich is working as an instructor at Rajamangala University of Technology Lanna. He received master degree of science in technical education in Mechanical Engineering from King Mongkut's University of Technology North Bangkok. His research focus on energy management. Email: sk@rmutl.ac.th

Kwanchai Kraitong , Naresuan University , Phitsanulok, Thailand

Kwanchai Kraitong is an assistant professor at Department of Mechanical Engineering, Faculty of Engineering, Naresuan University and takes responsibility in subjects related to Renewable energy and Thermal engineering in undergraduate and graduate levels. He has conducted on numerical and experimental investigation in field of solar energy and hydro energy including specializing on numerical modelling of Stirling engine.

Email: kwanchaik@nu.ac.th

Arwut Lapirattanakun, Naresuan University , Phitsanulok, Thailand

Arwut Lapirattanakun  received his D.Eng. in mechanical engineering from King Mongkut’s Institute of Technology Ladkrabang (KMITL) in 2016. He is currently an assistant professor at Naresuan University. His research interests include application of Boiler, Combustion technology and renewable energy. Email: arwutl@nu.ac.th

Autanan Wannachai , Chiang Mai University , Chiang Mai, Thailand

Autanan Wannachai received the B.Eng. in computer engineering from RMUTL and the M.Eng. and Ph.D. in computer engineering, from Chiang Mai University, Thailand. His research interests include embedded systems, wireless sensor networks, early warning systems for disasters, and autonomous systems.

Email: autanan_wan@gmail.com

Surapin Promdan , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Surapin Promdan received the M.Eng. in mechanical engineering from Chiang Mai University in 2009. Currently he is a lecturer at RMUTL. His research interests include machine design, mechanical design, mining equipment and heat exchanger. Email: surapin_me@hotmail.com

 

Nuttarut Panananda , Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Nuttarut Panananda is working at Rajamangala University of Technology Lanna (RMUTL) from 1999. His academic background is in the field of Mechanical Engineering. He received his Ph.D. in Sound and Vibration from Institute of Sound and Vibration Research (ISVR), University of Southampton, UK, in 2013. Research topics he interested in are about dynamic systems especially mechanical vibration. Email: nuttarut@rmutl.ac.th

Pracha Yeunyongkul, Rajamangala University of Technology Lanna,Thailand

Pracha Yeunyongkul received his D.Eng. in mechanical engineering from Chiang Mai University in 2012. He is currently an associate professor at Rajamangala University of Technology Lanna. His research interests include application of heat pipe, heat exchanger design and geopolymer. He received a lot of research grants such as the Thailand Science Research and Innovation (TSRI), TRM-RMUT Talent Resource Management and Electricity Generating Authority of Thailand (EGAT).

Tài liệu tham khảo

Collaboration for change (C4C), Office of the Permanent Secretary, Ministry of Energy, Thailand. Annual Report, 2021.

P. Terdtoon , Heat pipe, Department of Mechanical Engineering, Chiang Mai University, Chiang Mai, Thailand, 1993.

M.S. Soylemez, “On the optimum heat exchanger sizing for heat recovery,” Energy Conversion&Manage., vol. 41, pp. 1419-1427, 1999.

M. S. Soylemez, “On the thermoeconomical optimization of Heat Pipe Heat Exchanger HPHE for waste heat recovery,” Energy Conversion&Manage., vol. 44, pp. 2509-2517, 2002.

P. Yeunyongkul, “Optimum design of heat pipe condenser for vapor compression refrigeration,” Ph.D. dissertation, Chiang Mai University, Chiang Mai, Thailand, 2012.

W. Prajumchop, “Thermoeconomical optimization of heat pipe heat exchanger,” M.S. Thesis, Chiang Mai University, Chiang Mai, Thailand, 2005.

ESDU 81038. Heat pipes – performance of two-phase closed thermosyphons, Nov. 1983.

ESDU 80017. Thermophysical properties of heat pipe working fluids: operating range between –60°C and 300°C, Aug. 1980.

Tải xuống

Đã Xuất bản

2023-08-28

Cách trích dẫn

[1]
S. . Sriwiga, “Design of the Optimum Heat Pipe Heat Exchanger to Recover Heat From Flue Gas of Boiler in case of Chiang Mai Orchid Hotel, Thailand”, JTE, vol 18, số p.h 4, tr 52–59, tháng 8 2023.

Số

T. 18 S. 4 (2023)

Chuyên mục

Bài báo khoa học

Categories

Giấy phép

Bản quyền (c) 2023 Tạp chí Khoa học Giáo dục Kỹ Thuật - ĐH SPKT TP.HCM

Giấy phép Creative Commons

Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .

Bản quyền thuộc về JTE.

Crossref
Scopus
Google Scholar
Europe PMC

Các bài báo được đọc nhiều nhất của cùng tác giả