Cooling Fan Uses the BLDC Motor
Email tác giả liên hệ:
dodzung@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.2025.1456Từ khóa:
Direct current, Brushless direct current motor, Electromotive force, Oled, Engine coolant temperatureTóm tắt
The article presents simulation results, experimental results, and calculations of temperature control via an NTC temperature sensor and then demonstrates Oled SH1106 using the I2C port for communication. The author uses a 12V/100W BLDC motor with a maximum speed of 5380rpm to replace a 12V/100W DC motor with a maximum speed of 2200rpm. The author uses Arduino to control the speed of the cooling fan and shows it through the OLED screen. The input of the control is an NTC-type temperature sensor. However, this control method is independent of the control on the vehicle's control box. This may be a limitation, but this research mainly demonstrates the applicability of BLDC motors. Using the overview method of DC motors compared to BLDC motors, calculate the temperature to control BLDC motors to reduce the heat of internal combustion engines and electric motors on cars. Replacing DC motors with another motor is a step forward in the electric motor industry. BLDC motor is an option to replace the DC motor.
Tải xuống: 0
Tài liệu tham khảo
J. H. Choi, I. S. Jung, J. Hur, H. G. Sung, and Y. K. Lee, “On the feasibility of the brushless DC (BLDC) motor and controller for 42 V automotive cooling fan system,” in Proc. Int. Conf. Electric, Mach. Drives, 2007, pp. 1349–1354. DOI: https://doi.org/10.1109/IEMDC.2007.383625
G. Prudhvi, G. Vinay, G. S. Babu “Cooling Systems in Automobiles & Cars”, in International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249-8958 (Online), Vol. 2, No. 4, April 2013.
W. Cui, Y. Gong, and M. H. Xu “A Permanent Magnet Brushless DC Motor with Bifilar Winding for Automotive Engine Cooling Application”, in IEEE Transactions on Magnetics, Vol. 48, No. 11, China, November 2012. DOI: https://doi.org/10.1109/TMAG.2012.2202095
I. Ahmed “Engine coolant temperature sensor in Automotive Applications”, in Research Gate, Department of Automotive Software Engineering, Germany, June 2023.
Engine Coolant Temperature Sensor in Automotive
Applications
P. Yedamale “Brushless DC (BLDC) Motor Fundamentals”, in Microchip Technology Inc, USA, 2003, pp. 1–16.
H. Hembach and S. A. Evans “Systematic Comparison of BLDC Motors for Small Automotive Water Pump Applications”, in Proceedings of the 2008 International Conference on Electrical Machines, Germany, 2008, pp. 735-736. DOI: https://doi.org/10.1109/ICELMACH.2008.4800092
D. Mohanraj and R. Aruldavid “A Review of BLDC Motor: State of Art, Advanced Control Techniques, and Applications”, in IEEE Access, Vol.10, May. 2022, pp. 54833–54834. Digital Object Identifier 10.1109/ACCESS.2022.3175011 DOI: https://doi.org/10.1109/ACCESS.2022.3175011
A. Tashakori, M. Ektesabi, and N. Hosseinzadeh “Modeling of BLDC Motor with Ideal Back EMF for Automotive Applications” in Proceedings of the World Congress on Engineering, Vol 2, London, U.K, July 6 - 8, 2011, ISBN: 978-988-19251-4-5.
K. S. Reddy “Electrical devices & systems”, in CIIR research publications, Mar. 2023, pp. 34–39. ISBN 978-81-962236-8-7.
S. Rambabu “Modeling and control of a Brushless DC Motor” in Department of Electrical Engineering National Institute of Technology, Rourkela India, 2003, pp. 6–7.
I. Ahmed “Engine Coolant Temperature Sensor in Automotive Applications” in Department of Automotive Software Engineering, 2021.
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2025 Tạp chí Khoa học Giáo dục Kỹ Thuật
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
