An Improved Control Method for Direct Torque Control Based on Sliding Mode Control

Các tác giả

  • Thi-Hong-Huong Ngo 1Dong An Polytechnic, Vietnam https://orcid.org/0009-0007-9217-4516
  • Minh-Tam Nguyen Ho Chi Minh City University of Technology and Education, Vietnam
  • Vinh-Quan Nguyen Ho Chi Minh City University of Technology and Education, Vietnam

Email tác giả liên hệ:

ngothihonghuong1992@gmail.com

DOI:

https://doi.org/10.54644/jte.2024.1491

Từ khóa:

Direct Torque Control, Sliding Mode Control, Induction motor, Nonlinear Systems, Third-order cascade inverter

Tóm tắt

Bài báo trình bày phương pháp cải tiến điều khiển mômen trực tiếp (DTC) cho động cơ không đồng bộ ba pha roto
lồng sóc. Phương pháp cải tiến của DTC sử dụng ba bộ điều khiển chế độ trượt để điều khiển mô-men xoắn và từ
thông một cách độc lập.

Tải xuống: 0

Dữ liệu tải xuống chưa có sẵn.

Tiểu sử của Tác giả

Thi-Hong-Huong Ngo, 1Dong An Polytechnic, Vietnam

Ngo Thi Hong Huong was born in 1992 in Vietnam, She received her M. E. degree in Electrical Engineering from HCM city University of Technology and Education, Vietnam, in 2019. She is currently working as a lecturer in Faculty of Electrical Technology, Dong An Polytechnic.

Email: ngothihonghuong1992@gmail.com. ORCID:  https://orcid.org/0009-0007-9217-4516

Minh-Tam Nguyen, Ho Chi Minh City University of Technology and Education, Vietnam

Nguyen Minh Tam was born in Vietnam, in 1971. He is the current lecturer at the Control Engineering and Automation Department. He is the current Dean of Faculty of Electrical and Electronic Engineering at Ho Chi Minh City University of Technology and Education, Vietnam. He received the B.E degree in Electrification and Electrical Power Supply from Ho Chi Minh City University of Technical Education, Vietnam, the Masters degree in Electrical Engineering from Ho Chi Minh City University of Technology, Vietnam and the Ph.D. degree in Engineering Science from the University of Technology, Sydney in 1995, 2003 and 2010 respectively. His research interests include system modelling, intelligent and robust control, and soft-computing. Email: tamnm@hcmute.edu.vn.

Vinh-Quan Nguyen, Ho Chi Minh City University of Technology and Education, Vietnam

Nguyen Vinh Quan was born in Vietnam, in 1963. He received his M. E. degree in Automation from HCM city University of Technology, VNU-HCMC, Vietnam, in 2011. He had also received the Ph. D. degree in Power systems from HCM city University of Technology, VNU-HCMC, Vietnam, in 2020. He is currently working as a lecturer in Faculty of Electrical and Electronics Engineering, HCM city University of Technology and Education. His research interests are circuit design, power electronics control, and embedded systems. Email: quannv@hcmute.edu.vn

Tài liệu tham khảo

G. Majumdar and D. Medaule, "A new generation of intelligent power devices for motor drive applications," in Fifth International Conference on Power Electronics and Variable-Speed Drives, London, UK, 1994, pp. 35-41, doi: 10.1049/cp:19940936. DOI: https://doi.org/10.1049/cp:19940936

K. B. Lee, Student Member,IEEE, Joong-Ho Song, Ick Choy, and Ji-Yoon Yoo,Member,IEEE, “Torque Ripple Reduction in DTC of Induction Motor Driven by Three-Level Inverter With Low Switching Frequency,” IEEE Transactions on Power Electronics, vol. 17, no. 2, pp. 255-264, March 2002, doi: 10.1109/63.988836. DOI: https://doi.org/10.1109/63.988836

V. N. Tien and N. D. Quan, “The direct control method of three-phase asynchronous motor torque,” Journal of science and technology, Danang University, vol. 35, no. 6, 2009.

P. Marino, M. D. Incecco, and N. Visciano, “Comparison of direct torque control methods for induction motors,” IEEE trans., 2001.

G. Buja et al., ”Direct torque control of the application motor drive,” IEEE ISIE Conf. Rec., 1997.

J. Donlon et al., ”Sliding Mode Control with Observer and Application,” Professor, Dept. of EEE, St. Peter’s University, Avadi, Chennai, Indi, vol. 5, no. 10, 2016.

N. T. H. Huong, “Three-phase asynchronous motor control by sliding mode control,” Master's thesis, Ho Chi Minh City University of Technical Education, October, 2019.

Q. Wu and C. Shao, ”Novel Hybrid Sliding-mode Controller for Direct Torque Control Induction Motor Drives,” Proceedings of the American Control Conference Minneapolis, Minnesota, USA, 2006, p. 2754-2758.

V. Utkin, “Sliding mode and their application in variable structure systems”, Moscow, 1978.

V. Q. Nguyen, Q. T. Tran, and H. N. Duong, ”Stator-flux-oriented control for three-phase induction motors using sliding mode control,” Journal of Electrical Systems, p. 171-184, 2020.

N. V. Quan and M. T. Long, “Sensorless sliding mode control method for a three-phase induction motor,” Electrical Engineering, vol. 104, p. 3685–3695, 2022, doi: 10.1007/s00202-022-01578-5. DOI: https://doi.org/10.1007/s00202-022-01578-5

Q. N. Vinh and T. P. T. Bich, “Sliding mode control of induction motor with fuzzy logic observer,” Electrical Engineering, vol. 105, p. 2769–2780, 2023, doi: 10.1007/s00202-023-01842-2. DOI: https://doi.org/10.1007/s00202-023-01842-2

N. V. Quan and M. T. Long, “Sliding mode control method for three-phase induction motor with magnetic saturation,” International Journal of Dynamics and Control, vol. 12, pp.1522–1532, 2024, doi: 10.1007/s40435-023-01269-4. DOI: https://doi.org/10.1007/s40435-023-01269-4

X. Zhang, L. Sun, K. Zhao, and L. Sun, "Nonlinear Speed Control for PMSM System Using Sliding-Mode Control and Disturbance Compensation Techniques," IEEE Transactions on Industrial Electronics, vol. 28, no. 3, pp. 1358 - 1365, 2013. DOI: https://doi.org/10.1109/TPEL.2012.2206610

S. S. Rashinkar and S. S. Sankeshwari, “Sliding-mode controller based indirect vector control ofinduction motor,” International Journal of Advances in Engineering & Technology, 2014.

Z. H. Salih, K. S. Gaeid, and A. Saghafinia, “Sliding Mode Control of Induction Motor with Vector Control in Field Weakening,” Modem Applied Science, vol. 9, no.2, 2015. DOI: https://doi.org/10.5539/mas.v9n2p276

Tải xuống

Đã Xuất bản

2024-04-28

Cách trích dẫn

[1]
Thi-Hong-Huong Ngo, Minh-Tam Nguyen, và Vinh-Quan Nguyen, “An Improved Control Method for Direct Torque Control Based on Sliding Mode Control”, JTE, vol 19, số p.h Special Issue 02, tr 53–65, tháng 4 2024.

Số

Chuyên mục

Bài báo khoa học

Categories