Thiết bị bộ xương ngoài khớp cổ tay với phương án truyền động bằng dây cáp mới
Email tác giả liên hệ:
dungcva@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.2024.1499Từ khóa:
Wrist exoskeleton, Torque Sensor, Self-adjusting mechanism, Cable Drive, Impedance ControlTóm tắt
This paper presents the design of a lower limb exoskeleton made for the purpose of wrist joint rehabilitation. The authors use the exoskeleton structure in order to cope with the user’s upper-limb kinematics and to provide motion to the wrist joint when the arm is in any possible spatial configuration. To reduce the inertia of the mechanical structure, the motors are fixed at the back of the user and the power transmission is realized via a cable drive transmission. Two elastic cables are used to control the flexion/extension movement of the wrist joint. The tensions inside the elastic cables are controlled within the use of 2 torque sensors. By using two DC motors, the actuation unit can act like human tendons and provides more natural assistance motion. At the output axis, a third torque sensor is used to allow the control of the interaction between the mechanism and the user’s wrist joint.
Tải xuống: 0
Tài liệu tham khảo
D. T. Mai, X. C. Dao, N. K. Luong, T. K. Nguyen, H. T. Nguyen, T. N. Nguyen, “Current State of Stroke Care in Vietnam”, Stroke: Vascular and Interventional Neurology, 2022. DOI: https://doi.org/10.1161/SVIN.121.000331
K. J. Ottenbacher and S. Jannell, “The results of clinical trials in stroke rehabilitation research”, Archives of neurology, vol. 50, n. 1, pp. 37-44, 1993. DOI: https://doi.org/10.1001/archneur.1993.00540010033014
P. Langhorne, F. Coupar, and A. Pollock, “Motor recovery after stroke: a systematic review”, Lancet Neurol., vol. 8, pp. 741-754, 2009. DOI: https://doi.org/10.1016/S1474-4422(09)70150-4
K. J. Guidera, R. Hontas, and J. A. Ogden, “Use of Continuous Passive Motion in Pediatric Orthopedics”, Journal of Pediatric Orthopeadics, vol. 10, pp. 120–123, 1990. DOI: https://doi.org/10.1097/01241398-199001000-00023
C. Liao, J. Tsauo, S. Huang, H. Chen, Y. Chiu, and T. Liou, “Preoperative range of motion and applications of continuous passive motion predict outcomes after knee arthroplasty in patients with arthritis”, Knee Surg Sports Traumatol Arthrosc., vol. 27, no. 4, pp. 1259-1269, 2019. DOI: https://doi.org/10.1007/s00167-018-5257-z
S. W. O Driscoll and N. J. Giori, “Continuous passive motion (CPM): theory and principles of clinical application”, Journal of rehabilitation research and development, vol. 37, no. 2, pp 179-188, 2000.
R. L. Worland, J. Arredondo, F. Angles, F. L. Jimenez and D. E. Jessup, “Home continuous passive motion machine versus professional physical therapy following total knee replacement”, The Journal of Arthroplasty, vol. 13, no. 7, pp. 784-787, 1998. DOI: https://doi.org/10.1016/S0883-5403(98)90031-6
N. J. London, M. Brown, and R. J. Newman, “Continuous Passive Motion”, Physiotherapy, vol. 85, pp. 616-618, 1999. DOI: https://doi.org/10.1016/S0031-9406(05)66042-7
R. Trochimczuk and T. Kuźmierowski, “Kinematic Analysis of Cpm Machine Supporting to Rehabilitation Process after Surgical Knee Arthroscopy and Arthroplasty”, International Journal of Applied Mechanics and Engineering, vol. 19, no. 4, pp. 841–848, 2014. DOI: https://doi.org/10.2478/ijame-2014-0059
H. H. A. Almoodi, N. Z. Azlan, I. Shahdad, and N. Kamarudzaman, “Continuous passive motion machine for elbow rehabilitation”, International Journal of Robotics and Control Systems, vol. 1, no. 3, pp. 402-415, 2021. DOI: https://doi.org/10.31763/ijrcs.v1i3.446
S. Miyaguchi, K. Nojiri, N. Matsunaga, and S. Kawaji, “On effective movement in CPM for shoulder joint”, IEEE International Conference on Systems, Man and Cybernetics, 2008. DOI: https://doi.org/10.1109/ICSMC.2008.4811331
S. Gusso, C. Salvador, and P. Hofman, “Design and testing of an MRI-compatible cycle ergometer for non-invasive cardiac assessments during exercise, BioMed Eng OnLine, 2012. DOI: https://doi.org/10.1186/1475-925X-11-13
V. A. D. Cai et al., “Cycling Rehabilitation Device – Design Solution”, International Conference on the Development of Biomedical Engineering in Vietnam, pp. 130-138, 2023. DOI: https://doi.org/10.1007/978-3-031-44630-6_10
T. H. Huynh et al., “Design of a Force Feedback Device for Wrist Rehabilitation”, Proceedings of the International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development (AMAS2021), Lecture note in Mechanical Engineering, Springer, Cham, 2002. DOI: https://doi.org/10.1007/978-3-030-99666-6_59
R. V. Ham, T. G. Sugar, B. Vanderborght, K. W. Hollander, and D. Lefeber, “Compliant actuator designs”, IEEE Robotics & Automation Magazine, vol. 16, no. 3, pp. 81-94, 2009. DOI: https://doi.org/10.1109/MRA.2009.933629
J. F. Veneman et al., "Design of a Series Elastic- and Bowden cable based actuation system for use as torque actuator in exoskeleton type training", Proceedings of the 2005 IEEE 9th International Conference on Rehabilitation Robotics, 2005.
A. Schiele, P. Letier, R. V. Der Linde, and F. V. Der Helm, “Bowden Cable Actuator for Force-Feedback Exoskeletons”, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3599-3604, 2006. DOI: https://doi.org/10.1109/IROS.2006.281712
G. Millet, S. Haliyo, S. Regnier, and V. Hayward, “The Ultimate Haptic Device: First Step”, Proceedings of the Third Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperation Systems, pp. 273-278, 2009. DOI: https://doi.org/10.1109/WHC.2009.4810858
V. A. D. Cai, V. L. Nguyen, and P. Bidaud, “Instrumented and active exoskeletons for human anatomical joints: Design methodology and applications”, IEEE International Conference on Robotics and Biomimetics (Robio), 2014.
T. H. Huynh et al., “A new cable drive solution for torque control of exoskeleton motorized joints”, International Conference on Computational Intelligence and Innovative Applications (CIIA 2022).
N. Hogan, “Impedance Control: An approach to Manipulation - Part I: Theory”, Journal of Dynamic Systems, Measurement and Control, vol. 107, 1985. DOI: https://doi.org/10.1115/1.3140702
N. Hogan, “Impedance Control: An approach to Manipulation - Part II: Implementation”, Journal of Dynamic Systems, Measurement and Control, vol. 107, 1985. DOI: https://doi.org/10.1115/1.3140713
N. Hogan, “Impedance Control: An approach to Manipulation - Part III: Application”, Journal of Dynamic Systems, Measurement and Control, vol. 107, 1985. DOI: https://doi.org/10.1115/1.3140701
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2024 Tạp chí Khoa học Giáo dục Kỹ Thuật
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
