Design and Construction of Multi-Parameter Health Testing and Monitoring Equipment
Email tác giả liên hệ:
cuongvc@hcmute.edu.vnDOI:
https://doi.org/10.54644/jte.2025.1761Từ khóa:
Vital signs, Patient monitoring, IoT in Healthcare, Multi-Parameter Monitoring, Home HealthcareTóm tắt
Since the COVID-19 pandemic, the demand for home healthcare services has increased significantly. According to a report by Global Market Insights, the home medical devices market is projected to reach a value of USD 58 billion by 2030, growing at an annual rate of 6.5%. To meet the demand for home healthcare, particularly the use of multi-parameter monitoring devices, this project aims to design a home health monitoring and tracking device focusing on four important physiological indicators: blood pressure, heart rate, temperature, and blood oxygen saturation. These are essential metrics for assessing health status, especially for patients with hypertension, hypotension, cardiovascular conditions, or post-COVID-19 status. This device utilizes the Arduino Mega Wi-Fi R3 as the processing center. The DS18B20 sensor is used to measure body temperature, the MAX30100 sensor measures heart rate and blood oxygen saturation, and the MPS20N0040D sensor combined with the ADC HX710 is employed to design the blood pressure measurement circuit. All collected data will be stored on a server through the ESP8266 module and then displayed on an Android phone using Android Studio software. Test results indicate that the system achieves high accuracy in measurements and maintains stable communication between the device and the application. This device has significant potential for application in home healthcare.
Tải xuống: 0
Tài liệu tham khảo
A. Athira, T. D. Devika, K. R. Varsha and S. S. Bose, "Design and Development of IOT Based Multi-Parameter Patient Monitoring System," 2020 6th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, 2020, pp. 862-866, doi: 10.1109/ICACCS48705.2020.9074293. DOI: https://doi.org/10.1109/ICACCS48705.2020.9074293
Mordor Intelligence, “Multiparameter Patient Monitoring Market Analysis”.
Mordor Intelligence, “Home Health Care Market Analysis”.
Grand View Research, “Multiparameter Patient Monitoring Systems Market Report”, pp. 116.
A. M. P. Ochoa, P. A. C. Asmal, L. F. G. Vásquez, J. O. O. Ordoñez and E. J. C. González, “Smart healthcare applications over 5G networks: A systematic review”, Applied Sciences, vol. 13, no. 3, pp. 1469, 2023, doi: 10.3390/app13031469. DOI: https://doi.org/10.3390/app13031469
M. N. Bhuiyan et al., "Design and Implementation of a Feasible Model for the IoT Based Ubiquitous Healthcare Monitoring System for Rural and Urban Areas," in IEEE Access, vol. 10, pp. 91984-91997, 2022, doi: 10.1109/ACCESS.2022.3202551. DOI: https://doi.org/10.1109/ACCESS.2022.3202551
P. S. B. Macheso and A. G. Meela, “IoT Based Patient Health Monitoring using ESP8266 and Arduino,” International journal of computer communication and informatics, vol. 3, no. 2, pp. 75-83, 2021, doi: 10.34256/ijcci2127. DOI: https://doi.org/10.34256/ijcci2127
W. U. Hasan, M. S. Khaja, S. Ahmed and M. MKhan, “Wireless Health Monitoring System,” presented at 2nd Borneo International Conference on Applied Mathematics And, Balikpapan, Indonesia, pp. 158–163, 2018, doi: 10.1109/bicame45512.2018.1570510420. DOI: https://doi.org/10.1109/BICAME45512.2018.1570510420
P. D. P. Adi and A. Kitagawa, “ZigBee Radio Frequency (RF) performance on Raspberry Pi 3 for Internet of Things (IoT) based blood pressure sensors monitoring,” International Journal of Advanced Computer Science and Applications (IJACSA), vol. 10, no. 5, pp. 18-27, 2019, doi: 10.14569/IJACSA.2019.0100504. DOI: https://doi.org/10.14569/IJACSA.2019.0100504
M. I. M. Sani, “Design and implementation of blood pressure monitoring system”, 2013.
G. S. Stergiou et al., “A universal standard for the validation of blood pressure measuring devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement”, Hypertension, vol. 71, no. 3, pp. 368-374, 2018, doi: 10.1161/HYPERTENSIONAHA.117.10237. DOI: https://doi.org/10.1161/HYPERTENSIONAHA.117.10237
Y. Kodithuwakku, A. D. Sandanayake, C. Bandara and V. Logeeshan, "IoT Based Healthcare Kit for Domestic Usage," 2022 IEEE World AI IoT Congress (AIIoT), Seattle, WA, USA, 2022, pp. 760-765, doi: 10.1109/AIIoT54504.2022.9817235. DOI: https://doi.org/10.1109/AIIoT54504.2022.9817235
B. Pradhan, S. Bhattacharyya, and K. Pal, "IoT-Based Applications in Healthcare Devices", Journal of Healthcare Engineering, vol. 2021, pp. 0-18, doi: 10.1155/2021/6632599. DOI: https://doi.org/10.1155/2021/6632599
Tải xuống
Đã Xuất bản
Cách trích dẫn
Giấy phép
Bản quyền (c) 2025 Tạp chí Khoa học Giáo dục Kỹ Thuật
Tác phẩm này được cấp phép theo Giấy phép quốc tế Creative Commons Attribution-NonCommercial 4.0 .
Bản quyền thuộc về JTE.
