Lý thuyết biến dạng cắt bậc cao cho phân tích ổn định và dao động tự do tấm sandwich chức năng

Các tác giả

  • Nguyen Trung Kien Ho Chi Minh City University of Technology and Education, Vietnam
  • Vo Phuong Thuc Northumbria University, Newcastle upon Tyne, UK
  • Thai Huu Tai University of New South Wales, Sydney, NSW, Australia
  • Nguyen Van Hau Ho Chi Minh City University of Technology and Education, Vietnam

Email tác giả liên hệ:

kiennt@hcmute.edu.vn

Từ khóa:

Tấm sandwich chức năng, Dao động, Ổn định

Tóm tắt

Trong bài báo này, các tác giả đã đề xuất một lý thuyết biến dạng cắt bậc cao cho phân tích ổn định và dao động tự do của tấm sandwich chức năng. Các phương trình chuyển động được rút ra từ nguyên lý Hamilton được thiết lập dựa trên sự phân bố bậc cao của ứng suất cắt ngang thỏa mãn điều kiện biên tự do ứng suất. Lời giải giải tích nhận được đối với các điều kiện biên khác nhau đối với tấm sandwich chức năng cho phép kiểm tra tính hiệu quả của lý thuyết đã phát triển.

Tải xuống: 0

Dữ liệu tải xuống chưa có sẵn.

Tài liệu tham khảo

A. M. Zenkour, A comprehensive analysis of functionally graded sandwich plates: Part 1 -Deflection and stresses, Int. J. Solids Struct., 42, 5224–5242, 2005.

A. M. Zenkour, A comprehensive analysis of functionally graded sandwich plates: Part 2 - Buckling and free vibration, Int. J. Solids Struct., 42, 5243–5258, 2005.

N. E. Meiche, A. Tounsi, N. Ziane, I. Mechab, E. A. Adda Bedia, A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate, Int. J. Mech. Sci., 53, 237 – 247, 2011.

M. Sobhy, Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions, Compos. Struct., 99, 76 – 87, 2013.

A. M. A. Neves, A. J. M. Ferreira, E. Carrera, M. Cinefra, C. M. C. Roque, R. M. N. Jorge, C. M. M. Soares, Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique, Compos. Part B: Eng., 44, 657–674, 2013.

A. Bessaim, M. S. Houari, A. Tounsi, S. Mahmoud, E. A. Adda Bedia, A new higher-order shear and normal deformation theory for the static and free vibration analysis of sandwich plates with functionally graded isotropic face sheets, J. Sandw. Struct. Mater., In press, 2013.

A. Xiang,Y. Jin, Z. Bi, S. Jiang, M. S. Yang, A n-order shear deformation theory for free vibration of functionally graded and composite sandwich plates, Compos. Struct., 93, 2826– 2832, 2011.

Q. Li, V. P. Iu, K. P. Kou, Three-dimensional vibration analysis of functionally graded material sandwich plates, J. Sound Vib., 311, 498–515, 2008.

T. K. Nguyen, T. P. Vo, H. T. Thai, Vibration and buckling analysis of functionally graded sandwich plates with improved transverse shear stiffness based on the first-order shear deformation theory, Proc IMechE Part C: J. Mech. Eng. Sci., 228, 2110–2131, 2014.

H. T. Thai, T. K. Nguyen, T. P. Vo, J. Lee, Analysis of functionally graded sandwich plates using a new first-order shear deformation theory, Eur. J. Mech. A/Solids, 45, 211 – 225, 2014.

V. H. Nguyen, T. K. Nguyen, H. T. Thai, T. P. Vo, a new inverse trigonometric shear deformation theory for isotropic and functionally graded sandwich plates, Compos. Part B: Eng., 66, 233-246, 2014.

Tải xuống

Đã Xuất bản

2014-09-29

Cách trích dẫn

[1]
Nguyen Trung Kien, Vo Phuong Thuc, Thai Huu Tai, và Nguyen Van Hau, “Lý thuyết biến dạng cắt bậc cao cho phân tích ổn định và dao động tự do tấm sandwich chức năng”, JTE, vol 9, số p.h 3, tr 83–90, tháng 9 2014.

Các bài báo được đọc nhiều nhất của cùng tác giả