Design the model control of wind turbine speed by bevel-gear system
Corressponding author's email:
phuongnn@hcmute.edu.vnKeywords:
wind turbine, the bevel-gear systemAbstract
Today, the researches of wind turbine is how to effectively control the speed of the turbine when the wind speed changes, ensure that the turbines are highest effective performance. The paper content presented a system control of wind turbine speed by using the bevel-gear system to revolve the turbine blade, with method design, calculation and manufacturing absolutely no complex. Experimental model was conducted with different spindle speeds and noted the ability to control the speed of the speed system.The fist results show that the research process has brought success in control the wind turbine speed, the turbine are highest effective performance ensure stability and balance for the whole turbine system during operation.
Downloads: 0
References
Gijs van Kuik, Wim. Bierbooms, Introduction to wind turbine design, DUWIND_Delft University Wind Energy Research Institute, Januarie 2002.
Martin O.Hansen, Aerodynamics of Wind Turbines, Second edition published by Earthscan in the UK and USA in 2008.
David Sharpe, Ervin Bossanyi, Nick Jenkins, Tony Burton, Wind enery handbook, Copyright 2001 by JohnWiley & Sons, Ltd Baffins Lane, Chichester West Sussex, PO19 1UD, England.
Grant Ingram, Wind Turbine Blade Analysis using the Blade Element Momentum Method.Version 1.1, October 18, 2011.
Peter J. Schubel, RichardJ.Crossley, Wind Turbine Blade Design, Faculty of Engineering, Division of Materials, Mechanics and Structures, University of Nottingham, University Park, Nottingham NG7 2RD, UK
Downloads
Published
How to Cite
Issue
Section
Categories
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright © JTE.
