Modal analysis for three dimensional frame structures element using FEM

Authors

  • Hoang Trung Hien Ho Chi Minh City University of Technology and Education, Vietnam
  • Chuong Thiet Tu Ho Chi Minh City University of Technology and Education, Vietnam
  • Nguyen Hoai Son Ho Chi Minh City University of Technology and Education, Vietnam

Corressponding author's email:

tapchikhgkdt@hcmute.edu.vn

Keywords:

Natural Frequency, Finite Element Method, Frame Theory, Modal analysis.

Abstract

The dynamic analysis is a necessity in the design, manufacturing and maintenance of structures. The analytic solutions are not available for most practical cases and the Finite Element Method (FEM) is not reliable due to the joint problem, unclear loading, material properties and numerical error. It was proposed to find the several important modes of resonance peak for these fixed type structures. Furthermore, it is expected that the analysis method and the data in this study can be applied to a dynamic design and dynamic performance evaluation. In this paper, we present a way to find modes shape of 3D Frame by FEM program using Matlab.

Downloads: 0

Download data is not yet available.

References

Nguyễn Hoài Sơn (chủ biên), “Phương pháp phần tử hữu hạn với Matlab”, NXB Đại học Quốc gia Tp. HCM, 2001.

Nguyễn Hoài Sơn, “Phương pháp tính - Ứng dụng trong tính toán kỹ thuật”, NXB Đại học Quốc gia Tp. HCM, 2008.

Nguyễn Hoài Sơn (chủ biên), “Ứng dụng phương pháp phần tử hữu hạn trong tính toán kết cấu”, NXB Đại học Quốc gia Tp. HCM, 2008.

A.J.M.Ferreira, “Matlab Codes for Finite Element Analysis”, Porto, Portugal, 2008.

Bathe, “Finite element procedures”, Prentice-Hall, 1996

Choong-Yul Son, Kang-Su Lee, Jung-Tak Lee, Keon-Hoon Kim” A Study on the Sensitivity of Dynamic Behavior of Jacket Type Offshore Structure”, Korea, 2011.

David V.Hutton, “Fundamentals of Finite Element Analysis”, McGraw-Hill, Inc, 2004.

James F. Wilson,”Dynamics of Offshore Structures”, Inc., Hoboken, New Jersey, 2003.

Joseph Penzien, Ray W.Clough, “Dynamics of Structures”, Computer S Structures, Inc, USA, 1995.

Haritos, “Introduction to the Analysis and Design of Offshore Structures–An Overview”. EJSE Special Issue: Loading on Structures (2007).

Paul A Frieze, “Offshore structure design and construction”, UK, 2009.

Singiresu S.Rao,”Mechanical Vibrations”, Purdue University, 2000.

S.Graham Kelly, “Fundamentals of Mechanical Vibrations”, McGraw-Hill, Inc, 1999.

Shehab Mourad, Mohaned Fayed, Mostafa Zidan, Mohamad Harb,” Dynamic Response of Fixed Offshore Structures under Environmental Load”, 11th ICSGE, Cairo, Egypt, 2005.

Prof. V. Stejskal, “Mechanics with Matlab”, Czech Technical University, Czech Republic, 2001.

Yeong-Bin Yang, Shyh-Rong Kuo, “Theory and analysis of nonlinear framed structures”, Prentice Hall, 1994

Y.Nakasone, S.Yohimoto, T.A.Stolarski, “Engineeing Analysis with Ansys Software”, Elserier Butterworth-Heinemann, 2006.

Wright, E.W., Gaylord, E.H, “Analysis of unbraced multistory steel rigid frames, International Journal of Structural”, Division ASCE, 94, 1143-1163 (1968).

Downloads

Published

25-04-2013

How to Cite

[1]
Hoang Trung Hien, Chuong Thiet Tu, and Nguyen Hoai Son, “Modal analysis for three dimensional frame structures element using FEM”, JTE, vol. 8, no. 1, pp. 65–72, Apr. 2013.

Issue

Section

Research Article

Categories