Proposal of noninvasive failure diagnosis of electrical motor using googlenet

Authors

  • Van Tung Hoang Vinh Long University of Technology Education, Vietnam
  • Van Khanh Nguyen Can Tho University, Vietnam
  • Chi Ngon Nguyen Can Tho University, Vietnam

Corressponding author's email:

ncngon@ctu.edu.vn

DOI:

https://doi.org/10.54644/jte.66.2021.1070

Keywords:

Fault diagnosis, CNN, 2-D scalogram image, wavelet, GoogLeNet

Abstract

Fault diagnosis is a useful tool that reduces system maintenance risks and costs. However, data related to the system's nominal and fault operating behavior is often not collected and stored adequately, it is difficult to identify and suggest automated fault detection methods. This study proposes a solution to apply deep learning technique on the convolutional neural network (CNN) to identify some common errors on induction motors based on operation sound. The opreration sound signal emitted from on a 0.37 kW two-pole induction motor is collected in some cases such as normal operation, phase loss, phase difference and bearing breakage. Their 2-D scalogram images are analyzed by continuous Wavelet transformation which is used to train and evaluate the deep learning CNN (i.e. GoogLeNet) to identify the above faults. Experimental results show that this method can diagnose induction motor faults with accuracy up to 98.8%.

Downloads: 0

Download data is not yet available.

References

Report of Large Motor Reliability Survey of Industrial and Commercial Installations: Part 3, IEEE Transactions on Industry Applications, vol. IA-23, no. 1, pp. 153-158, 1987. DOI: https://doi.org/10.1109/TIA.1987.4504880

H. Henao, GA. Capolino, M. Fernandez-Cabanas, F. Filippetti, C. Bruzzese, E. Strangas, R. Pusca, J. Estima, M. Riera-Guasp and S. Hedayati-Kia, Trends in Fault Diagnosis for Electrical Machines A Review of DiagnosticTechniques, IEEE Industrial Electronics Magazine, 8 (2), pp. 31-42, 2014. DOI: https://doi.org/10.1109/MIE.2013.2287651

A. Glowacz, W. Glowacz and Z. Glowacz, Recognition of armature current of DC generator depending on rotor speed using FFT, MSAF-1 and LDA, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 17(1), pp. 64-69, 2015. DOI: https://doi.org/10.17531/ein.2015.1.9

Y. Li, F. Chai, ZX. Song and ZY. Li, Analysis of vibrations in interior permanent magnet synchronous motors considering air-gap deformation, Energies, 10(9), 1259, 2017. DOI: https://doi.org/10.3390/en10091259

R. Yousefi, R. Yusof and R. Arfa, Fault diagnosis of three-phase induction motors based on vibration and electrical current signals, Jurnal Teknologi, 78, pp. 129-33, 2016. DOI: https://doi.org/10.11113/jt.v78.7447

J. Jozwik, Identification and monitoring of noise sources of cnc machine tools by acoustic holography methods, Advances in Science and Technology Research Journal, 10(30), pp. 127-137, 2016. DOI: https://doi.org/10.12913/22998624/63386

T. Ciszewski, L. Gelman and L. Swedrowski, Current-based higher-order spectral covariance as a bearing diagnostic feature for induction motors. Insight - Non - Destructive Testing and Condition Monitoring, 58(8), pp. 431-434, 2016. DOI: https://doi.org/10.1784/insi.2016.58.8.431

C. Verucchi, J. Bossio, G. Bossio and G. Acosta, Misalignment detection in induction motors with flexible coupling by means of estimated torque analysis and MCSA. Mechanical Systems and Signal Processing, 80, pp. 570-581, 2016. DOI: https://doi.org/10.1016/j.ymssp.2016.04.035

PA. Delgado-Arredondo, D. Morinigo-Sotelo, RA. Osornio-Rios, JG. Avina-Cervantes, H. Rostro-Gonzalez and RD. Romero-Troncoso, Methodology for fault detection in induction motors via sound and vibration signals. Mechanical Systems and Signal Processing, 83, pp. 568-589, 2017. DOI: https://doi.org/10.1016/j.ymssp.2016.06.032

R. Lara, R. Jimenez-Romero, F. Perez-Hidalgo and MD. Redel-Macias, Influence of constructive parameters and power signals on sound quality and airborne noise radiated by inverter-fed induction motors, Measurement, 73, pp. 503-514, 2015. DOI: https://doi.org/10.1016/j.measurement.2015.05.049

W. Gong, H. Chen, Z. Zhang, M. Zhang, R. Wang, C. Guan and Q. Wang, A novel deep learning method for intelligent fault diagnosis of rotating machinery based on improved CNN-SVM and multichannel data fusion. Sensors, 19, 1693, 2019. DOI: https://doi.org/10.3390/s19071693

C. Szegedy, W. Liu, Y. Jia, P. Sermanet, S. Reed, D. Anguelov, D. Erhan, V. Vanhoucke and A. Rabinovich, Going deeper with convolutions. Computing Research Repository, 2015. DOI: https://doi.org/10.1109/CVPR.2015.7298594

Y. Yin, .Y Hu and P. Liu, The research on denoising using wavelet transform. International Conference on Multimedia Technology, 2011. https://doi.org/10.1109/ICMT.2011.6002276 DOI: https://doi.org/10.1109/ICMT.2011.6002276

M. Sandler, A. Howard, M. Zhu, A. Zhmoginov and LC. Chen, MobileNetV2: Inverted Residuals and Linear Bottlenecks, arXiv preprint, arXiv:1801.04381, 2018. DOI: https://doi.org/10.1109/CVPR.2018.00474

N. Duong-Trung, LD. Quach and CN. Nguyen, Towards Classification of Shrimp Diseases Using Transferred Convolutional Neural Networks, Advances in Science, Technology and Engineering Systems Journal, 5(4), pp. 724-732, 2020. DOI: https://doi.org/10.25046/aj050486

Inc. The MathWorks, Wavelet Toolbox User's Guide, Online, Retrived on August, 2021, from https://www.mathworks.com/help/pdf_doc/wavelet/wavelet_ug.pdf

Inc. The MathWorks, Continuous wavelet transform filter bank, Online, Retrived on August, 2021, from https://it.mathworks.com/help/wavelet/ref/cwtfilterbank.html

Inc. The MathWorks, GoogLeNet convolutional neural network, Online, Retrived on August, 2021, from https://www.mathworks.com/help/deeplearning/ref/googlenet.html

Published

28-10-2021

How to Cite

[1]
V. T. Hoang, V. K. Nguyen, and C. N. Nguyen, “Proposal of noninvasive failure diagnosis of electrical motor using googlenet”, JTE, vol. 16, no. 5, pp. 83–93, Oct. 2021.

Issue

Section

Research Article

Categories

Similar Articles

You may also start an advanced similarity search for this article.