Control and Automation Engineering

All Items

• Experimental Fuzzy Control for Tower Crane

  Van Dong Hai Nguyen, Vi Do Tran, Minh Tam Nguyen, Van Phong Vu, Van Thuyen Ngo, Thien Van Nguyen

  36-47

• Some new results in simulation of single electron transistor

  Hoang Minh Le , Sy Hien Dinh

  10-19

• Implementation and evaluation of network-on-chip by using synopsys tool

  Pham Van Khoa

  20-28

• Design and verification of an I2C controller

  Duong Minh Tri, Nguyen Hoang Ky Anh, Nguyen Chi Phuc, Nguyen Dinh Cao Tu, Tran Minh Tri, Huynh Hoang Ha, Do Duy Tan

  60-68

• A study of carrier pulse width modulation for single phase 5-levels cascaded inverter

  Nguyen Phuoc Loc, Bui Thanh Hieu, Vo Quoc Thai, Dao Thi Be Dung, Nguyen Van Nho

  1-9

• Analysis of parameters affecting the performance of optical camera communication system

  Nguyon Duy Thong, Pham Van Khoa

  46-53

• Design and verification of serial interface engine module in usb standard

  Tran Duc Sang, Nguyen Van Thanh Loc, Tran Quoc Tan, Tran Thi Quynh Nhu, Huynh Hoang Ha, Do Duy Tan

  84-93

• Research for controlling the hybrid renewable energy connected to the low voltage grid

  Truong Dinh Nhon, Ngo Van Thuyen, Nguyen Thi Mi Sa, Hoang An Quoc

  29-35

• Design of sliding mode controller with PI sliding surface based on low pass filter the mass spring damper system

  Ma So Hien, Pham Thanh Tung

  69-74

• Applying neural network for rain forecast with wireless sensor network

  Tran Kim Toai, Duong Cao Trong Nhan, Vo Minh Huan

  10-19

• Performance evaluation of noma in wireless communications

  Nguyen Thi Thu Thao, Nguyen Hoang Tu, Ho Nhut Minh, Do Duy Tan, Truong Quang Phuc

  36-45

• Design and simulation of microstrip patch array antenna with HFSS for 2.45GHz applications

  Truong Ngoc Ha

  75-83

• Modified sine pulse width modulation strategy for three level T-type inverter to reduce total harmonic distortion

  Do Duc Tri, Vy Van Vu, Doan Anh Tuan, Truong Dinh Nhon, Nguyen Duy Thao, Ho Anh Khoa

  57-64

• Flux identification the rotor of six-phase induction motor using RBF neural network

  Nguyen Viet Trung, Pham Thanh Tung

  106-112

• Design, simulation, fabrication and control a 3-DOF planar robotic manipulator

  Tran Dinh Hoa, Nguyen Van Khiem, Tran Duc Thien

  40-47

• Study on sub synchronous resonance alleviation for DFIG based wind farms by using TCSC

  Nguyen Nhan Bon, Tang Hoang Nam

  7-14

• Real-time bus routing system in Danang City

  Nguyen Thi Khanh Hong, Pham Duy Duong

  24-30

• Modified PWM strategy for three level T-type inverter to increase boost factor

  Do Duc Tri, Tran Vinh Thanh , Nguyen Phan Thanh, Chiem Trong Hien

  65-72

• A comparative study between input-output linearization control technique and backstepping control method for induction motor

  Bui Thi Kim Hue, Mai Nhat Thien, Luong Hoai Thuong, Huynh Thi Du, Ngo Bich Nen, Huynh Thanh Tuong

  48-56

• A study on vibration and noise of differential by using comsol multiphysics simulation

  Nguyen Phu Thuong Luu

  99-105

• Design of mobile robotic platform for high load transportation

  Cai Viet Anh Dung, Le Ngoc Huan, Nguyen Viet Thang, Nguyen Duc Canh, Nguyen Thanh Son, Trinh Trung Dung, Le Minh Khiem, Phan Tran Thanh Loi, Thai Nhat An, Huynh Tan Hung, Nguyen Hung Tinh Vu, Nguyen Huy Thien

  15-23

• A solution of tracking-device design for offshore vessel

  Nguyen Tuan Phuoc, Nguyen Quoc Chung, Le Viet Nhat Quang, Diep Vi Cuong, Nguyen Minh Khanh Ngoc

  31-39

• Capacitor voltage balancing and common mode elimination for three level T-type inverter

  Do Duc Tri, Le Hieu Giang, Nguyen Minh Triet, Tran Ngoc Hao, Nguyen Duy Thao, Nguyen Thoi

  19-27

• Position control mass spring damper system based on full state feedback technique

  Pham Thanh Tung, Nguyen Chi Ngon

  98-104

• Dynamic algorization for selecting tasks in IoTS system

  Tran Cong Thinh, Vo Minh Huan

  46-56